Davey - Regul'Matic Pipe Saddle Clamp 50 mm - 5447REG

Davey – Regul’Matic Pipe Saddle Clamp 50 mm

This genuine Davey spare part is a 50 mm pipe saddle clamp designed for use with the Davey Regul’Matic salt chlorination control system. It mounts directly onto a 50 mm PVC pressure pipe in the pool’s circulation circuit, creating a secure branch-connection point for the system’s Redox or pH probe. It is typically replaced when the clamp body cracks, leaks, or is damaged during routine probe servicing.

Compatibilité

This saddle clamp is a genuine Davey spare part (part number 5447REG) specifically listed for the Davey Regul’Matic chlorine/Redox regulation system. It is intended for standard 50 mm outside-diameter PVC pressure pipework, which is the most common pipe size found in domestic pool plant rooms. Always verify your pipe’s outside diameter before ordering.

Pourquoi l'authenticité est importante

Using the correct OEM saddle clamp ensures a watertight, vibration-resistant seal around the probe port — a poor-fitting aftermarket clamp can cause slow leaks or misalignment of the probe, leading to inaccurate chlorine readings and premature probe failure. Fitting a genuine Davey part protects the performance and longevity of your Regul’Matic system.

Installation

The saddle clamp is fitted by a qualified pool technician onto the return pipe of the filtration circuit, downstream of the filtration and heating equipment. Once clamped, the probe is inserted into the saddle port and connected to the Regul’Matic control unit. No pipe cutting is required if a port is already present; otherwise a professional should drill and tap the port before fitting the clamp.