Davey - Carte de commande principale EcoSalt BMSC 13 (carte électronique) - M112013EUSP

Davey – EcoSalt BMSC 13 Main Control PCB (Electronic Board)

This is the genuine Davey replacement main control PCB (printed circuit board) for the EcoSalt BMSC 13 salt water pool chlorinator — the electronic board that manages power delivery, polarity switching, the sanitiser output dial, and all protective functions of the unit. It is the brain of the chlorinator’s power supply housing and is typically replaced when the unit fails to start, shows erratic LED behaviour, or has suffered damage from chemical vapour exposure or electrical fault.

Compatibilité

This PCB is designed exclusively for the Davey / Monarch EcoSalt BMSC 13 salt chlorinator — the 13 g/h chlorine output model. It is not interchangeable with other BMSC variants (such as the BMSC 20 or BMSC 26), as voltage and circuit specifications differ between models. Always verify your chlorinator’s output rating from the label on the side of the power supply housing before ordering.

Pourquoi l'authenticité est importante

Davey’s own product documentation explicitly warns pool owners to always insist on genuine EcoSalt replacement parts, noting that non-genuine electronics can cause serious damage to the unit and may void any remaining warranty. As a discontinued line with increasingly limited spare parts availability, this genuine Davey PCB is a valuable find for owners wishing to extend the service life of their BMSC 13 — sold while stock lasts.

Installation

Replacement of the main control PCB involves working inside the chlorinator’s power supply enclosure and requires disconnection from mains power. The unit must be kept away from acid fumes and chemical storage areas, as corrosive vapours are a leading cause of PCB failure. This work should be carried out by a qualified pool technician or electrician to ensure safe and correct reinstallation.