Davey - Tapa trasera de la bomba Silensor (series SLS-1 / SLL-1) - 13619-1SP

Davey – Silensor Pump Rear Cover (SLS-1 / SLL-1 Series)

This is the genuine Davey replacement rear cover for Silensor SLS and SLL pool pumps in the current “-1” production series (manufactured from 2017 onwards). The rear cover seals the non-drive end of the motor, protecting the capacitor housing and internal wiring from moisture and environmental exposure. It is typically replaced during a motor service when the cover shows cracking, warping, or seal degradation.

Compatibilidad

This part fits Davey Silensor SLS and SLL pump models ending in “-1” (post-2017 production), including single-phase variants across the SLS and SLL size ranges. It is not compatible with older “-0” series pumps. To confirm your series, check the model number on the data label affixed to the rear of your pump.

Por qué lo genuino importa

The rear cover must form a reliable, weatherproof seal against the motor casing to protect internal electrical components including the capacitor. A genuine Davey part ensures correct dimensional fit and material integrity, maintaining the pump’s IP rating and preserving your warranty. Third-party alternatives may not achieve the precise tolerance required for the Silensor’s water-cooled motor architecture.

Instalación

The rear cover is secured by a single bolt and removed using a 13mm ring spanner. Always inspect the internal gasket during removal and replace it if damaged. Note that access to the capacitor is gained once the cover is removed — handle capacitors with care and note all wiring connections before disconnecting. This service work should only be carried out by a qualified technician.