Zealux Inverboost Full inverter 165P - 16.5 kW
Versand 1-3 Wochen
Zertifiziert Online-Shop
Einfache Rückgaben innerhalb von 14 Tage
Suchen Sie Rat?
Zealux Inverboost 165P – 16.5 kW
The Zealux Inverboost 165P is a full inverter pool heat pump with heating and cooling, designed for efficient temperature control in medium-sized private pools. By continuously modulating compressor speed, it maintains a stable water temperature with smoother operation and improved efficiency compared to fixed-speed heat pumps. The ABS cabinet and twist titanium heat exchanger make it a robust choice for outdoor installation and compatible with both chlorinated and salt pool water when installed correctly.
- Recommended for pools of 25–85 m³ (With pool cover).
- Max heating capacity up to 16.5 kW in turbo conditions.
- Full inverter modulation for stable comfort and quieter part-load running.
Full inverter performance for stable pool comfort
The inverter compressor automatically adapts output to match demand, reducing start-stop cycling. This helps maintain a steady set temperature, supports lower running costs in typical use, and keeps noise down when the unit runs at partial capacity.
Heizung und Kühlung zur saisonalen Regelung
With both heating and cooling modes, the Inverboost 165P can extend the swimming season and help prevent water from getting too warm during heatwaves. For best results, use a pool cover to limit heat loss and stay within the recommended pool volume range.
Wichtige technische Daten
Empfohlenes Beckenvolumen: 25–85 m³ (With pool cover).
Heating capacity (Air 28°C / Water 28°C / Humidity 80%): 16.5–3.8 kW.
Leistungsaufnahme (Luft 28 °C / Wasser 28 °C): 2.75–0.24 kW.
COP (Luft 28 °C / Wasser 28 °C): 16–6.0.
Heating capacity (Air 15°C / Water 26°C / Humidity 70%): 11.0–3.0 kW.
Leistungsaufnahme (Luft 15 °C / Wasser 26 °C): 2.44–0.42 kW.
COP (Luft 15 °C / Wasser 26 °C): 7.2–4.5.
Stromversorgung: 220–240 V / 50 Hz / 1-phasig.
Rated current: 12.2 A.
Minimum fuse: 18 A.
Wasseranschluss: 50 mm.
Empfohlener Wasserdurchfluss: 4.6 m³/h.
Wasserdruckabfall: 15 kPa.
Wärmetauscher: Twist titanium exchanger in PVC.
Belüftungsart: Horizontal, 1 fan.
Schalldruck (10 m): ≤34 dB(A).
Sound pressure (1 m): 41–54 dB(A).
Abmessungen (L × B × H): 1040 × 355 × 895 mm.
Nettogewicht: 98 kg.
Hinweise zur Installation
Install with sufficient free airflow and use a correctly adjusted bypass so the heat pump receives the advised water flow. Keep chemical dosing downstream of the unit and avoid concentrated chemicals passing through the heat exchanger.
Zusätzliche Informationen
| Gewicht: | 98 kg |
|---|---|
| Reihe: | Inverboost |
| Modell: | 165P |
| Maximale Heizleistung (Turbo): | 16.5 kW |
| Heizleistungsbereich (28/28): | 16.5–3.8 kW |
| Heizleistungsbereich (15/26): | 11.0–3.0 kW |
| COP-Bereich (28/28): | 16–6.0 |
| COP-Bereich (15/26): | 7.2–4.5 |
| Empfohlenes Beckenvolumen: | 25–85 m³ (With pool cover) |
| Stromversorgung: | 220–240 V / 50 Hz / 1-phasig |
| Wasseranschluss: | 50 mm |
| Empfohlener Wasserdurchfluss: | 4.6 m³/h |
| Wärmetauscher: | Twist titanium exchanger in PVC |
| Kompressortyp: | Inverter-Kompressor |
| Belüftungsart: | Horizontal |
| Anzahl der Ventilatoren: | 1 |
| Schalldruck (10 m): | ≤34 dB(A) |
| Abmessungen (L × B × H): | 1040 × 355 × 895 mm |
| Nettogewicht: | 98 kg |
Im Detail
- Recommended for pools of 25–85 m³ (With pool cover).
- Der Voll-Wechselrichterbetrieb trägt zur Senkung des Energieverbrauchs bei.
- Heizung und Kühlung für eine bessere Temperaturregelung.
- Titanium heat exchanger suits salt and chlorine pools.
- Für eine optimale Leistung wird eine Poolabdeckung dringend empfohlen.
- Nicht ideal für größere Pools; wählen Sie ein Modell mit höherer kW-Leistung.
