Robinet cu bilă VIR PP DN25 1", filet interior, 16 bar, negru, tip 220
Livrare 1–3 săptămâni
Certificat magazin online
Retururi ușoare în termen de 14 zile
Ai nevoie de sfaturi?
VIR Type 220 Polypropylene Ball Valve DN25 – 1 Inch Female Thread, 16 bar
This full-bore ball valve is manufactured from black polypropylene (PP) and is designed for reliable shut-off duty in pool pipework, irrigation headers, greenhouse climate systems, and industrial water circuits. Rated to 16 bar working pressure across a temperature range of 0 °C to 75 °C, it handles the demands of both low-pressure irrigation and higher-pressure pool plant rooms with ease. The hard chrome-plated brass ball ensures a smooth, corrosion-resistant seating surface, while the PTFE seat seals provide a bubble-tight closure and low operating torque even after prolonged service.
Both ports are machined to BSP female thread (1 inch / DN25), allowing direct connection to male-threaded fittings, pump heads, filter housings, and manifold bodies without additional adapters. The fibreglass-reinforced nylon lever, finished in red, gives a firm grip and a clear open/closed visual indication at a glance. The compact body length of 73 mm (Lb) keeps installation space to a minimum, while the 84 mm overall body diameter and 25 mm bore (ØDf) guarantee minimal flow restriction.
Specificații
- Type: VIR Type 220 ball valve
- Diametru nominal: DN25
- Thread size (both ports): 1 inch BSP female (F-1 = F-2 = 20.5 mm thread engagement)
- Body outer diameter (ØDi-1 / ØDi-2): 84 mm
- Ball bore diameter (ØDf): 25 mm
- Lungime corp (Lb): 73 mm
- Overall length including lever (R / Ct-1): 120 mm
- Culoarea caroseriei: Negru
- Materialul corpului: polipropilenă (PP)
- Ball material: Hard chrome-plated brass
- Handle: Lever, red, fibreglass-reinforced nylon
- Materialul scaunului / garniturii: PTFE
- Presiune de lucru: 16 bar
- Temperature range: 0 °C – 75 °C
- Tipul conexiunii: filet interior la ambele capete
Compatibilitate
The 1 inch BSP female thread (DN25) on both ports connects directly to standard 1 inch male BSP nipples, pump unions, filter head adapters, and manifold fittings used in domestic and commercial pool systems, drip and sprinkler irrigation networks, and greenhouse heating circuits. The polypropylene body is compatible with clean water, mildly chlorinated water, and common fertiliser solutions within the stated temperature and pressure limits. It is not recommended for use with aromatic hydrocarbons, concentrated acids, or media that exceed 75 °C.
Informații suplimentare
| Marcă: | VIR |
|---|---|
| Tip: | Type 220 |
| Diametru nominal: | DN25 |
| Tipul conexiunii: | Filet interior BSP la ambele capete |
| Dimensiunea filetului: | 1 inch BSP |
| Lungimea corpului (Lb): | 73 mm |
| Lungime totală incl. maneta: | 120 mm |
| Diametrul exterior al corpului (ØDi-1 / ØDi-2): | 84 mm |
| Diametrul interior al bilei (ØDf): | 25 mm |
| Thread engagement depth (F-1 / F-2): | 20.5 mm each |
| Materialul carcasei: | Polipropilenă (PP) |
| Culoarea caroseriei: | Negru |
| Materialul mingii: | Alamă cu cromare dură |
| Materialul mânerului: | Nailon armat cu fibră de sticlă |
| Culoarea mânerului: | Roșu |
| Material scaun / garnitură: | PTFE |
| Presiunea de lucru: | 16 bari |
| Intervalul de temperatură: | 0 °C – 75 °C |
| Funcționare: | Manetă cu rotire de un sfert de tură |
Documente
-
Descărcare
bevo-0401584-0401580M_info_datasheet_en
186 Ko
-
Descărcare
bevo-0401584-0401580M_spareparts_explodedview_en
54 Ko
-
Descărcare
bevo-0401584-0401580M_spareparts_explodedview_en-1
54 Ko
În detaliu
- High 16 bar pressure rating suits both pool plant rooms and pressurised irrigation mains
- Full-bore 25 mm ball opening minimises pressure drop across the valve
- Hard chrome-plated brass ball delivers long service life and low operating torque
- Female BSP threads on both ends allow tool-free alignment and direct fitting to standard male connectors
- Compact 73 mm body length fits tight manifold and equipment-room installations
- Maximum 75 °C limits use in high-temperature hot-water or steam applications
- BSP female-to-female configuration requires male threaded counterparts — not suitable for plain-pipe push-fit connections
- Polypropylene body is not UV-stabilised for long-term exposed outdoor installation without shielding
