Valva de bola PP VIR DN25 1" rosca femella 16 bar negra Tipe 220
Enviament 1-3 setmanes
Certificat botiga en línia
Devolucions fàcils dins 14 dies
Busques consell?
VIR Type 220 Polypropylene Ball Valve DN25 – 1 Inch Female Thread, 16 bar
This full-bore ball valve is manufactured from black polypropylene (PP) and is designed for reliable shut-off duty in pool pipework, irrigation headers, greenhouse climate systems, and industrial water circuits. Rated to 16 bar working pressure across a temperature range of 0 °C to 75 °C, it handles the demands of both low-pressure irrigation and higher-pressure pool plant rooms with ease. The hard chrome-plated brass ball ensures a smooth, corrosion-resistant seating surface, while the PTFE seat seals provide a bubble-tight closure and low operating torque even after prolonged service.
Both ports are machined to BSP female thread (1 inch / DN25), allowing direct connection to male-threaded fittings, pump heads, filter housings, and manifold bodies without additional adapters. The fibreglass-reinforced nylon lever, finished in red, gives a firm grip and a clear open/closed visual indication at a glance. The compact body length of 73 mm (Lb) keeps installation space to a minimum, while the 84 mm overall body diameter and 25 mm bore (ØDf) guarantee minimal flow restriction.
Especificacions
- Tipus: vàlvula de bola VIR Tipus 220
- Diàmetre nominal: DN25
- Thread size (both ports): 1 inch BSP female (F-1 = F-2 = 20.5 mm thread engagement)
- Body outer diameter (ØDi-1 / ØDi-2): 84 mm
- Diàmetre de la bola (ØDf): 25 mm
- Longitud del cos (Lb): 73 mm
- Overall length including lever (R / Ct-1): 120 mm
- Color de la carrosseria: Negre
- Material del cos: Polipropilè (PP)
- Ball material: Hard chrome-plated brass
- Handle: Lever, red, fibreglass-reinforced nylon
- Material del seient / segell: PTFE
- Pressió de treball: 16 bar
- Temperature range: 0 °C – 75 °C
- Tipus de connexió: Rosca femella als dos extrems
Compatibilitat
The 1 inch BSP female thread (DN25) on both ports connects directly to standard 1 inch male BSP nipples, pump unions, filter head adapters, and manifold fittings used in domestic and commercial pool systems, drip and sprinkler irrigation networks, and greenhouse heating circuits. The polypropylene body is compatible with clean water, mildly chlorinated water, and common fertiliser solutions within the stated temperature and pressure limits. It is not recommended for use with aromatic hydrocarbons, concentrated acids, or media that exceed 75 °C.
Informació addicional
| Marca: | VIR |
|---|---|
| Tipus: | Type 220 |
| Diàmetre nominal: | DN25 |
| Tipus de connexió: | Rosca femella BSP als dos extrems |
| Mida del fil: | 1 polzada BSP |
| Longitud del cos (Lb): | 73 mm |
| Longitud total incl. palanca: | 120 mm |
| Diàmetre exterior del cos (ØDi-1 / ØDi-2): | 84 mm |
| Diàmetre del forat esfèric (ØDf): | 25 mm |
| Thread engagement depth (F-1 / F-2): | 20.5 mm each |
| Material del cos: | Polièster (PP) |
| Color de la carrosseria: | Negre |
| Material de la pilota: | Llautó cromat dur |
| Material del mànec: | Nylon reforçat amb fibra de vidre |
| Color del mànec: | Vermell |
| Material del seient / de la junta: | PTFE |
| Pressió de treball: | 16 bar |
| Interval de temperatura: | 0 °C – 75 °C |
| Operació: | Palanca de quart de volta |
Documents
-
Descarrega
bevo-0401584-0401580M_info_datasheet_en
186 KiB
-
Descarrega
bevo-0401584-0401580M_spareparts_explodedview_en
54 KiB
-
Descarrega
bevo-0401584-0401580M_spareparts_explodedview_en-1
54 KiB
En detall
- High 16 bar pressure rating suits both pool plant rooms and pressurised irrigation mains
- Full-bore 25 mm ball opening minimises pressure drop across the valve
- Hard chrome-plated brass ball delivers long service life and low operating torque
- Female BSP threads on both ends allow tool-free alignment and direct fitting to standard male connectors
- Compact 73 mm body length fits tight manifold and equipment-room installations
- Maximum 75 °C limits use in high-temperature hot-water or steam applications
- BSP female-to-female configuration requires male threaded counterparts — not suitable for plain-pipe push-fit connections
- Polypropylene body is not UV-stabilised for long-term exposed outdoor installation without shielding
