Norsup - Pompă de căldură cu invertor, verticală, model SG P 31TV/32, 400 V, 13,3 A, negru - 7036139

Norsup Heat Pump Inverter Vertical SG P 31TV/32 400V 13.3A Black

With a peak heating capacity of 31.2 kW and a peak COP of 15.7 at A27/W27, the Norsup Vertical SG P 31TV/32 is built for large pools of 90–160 m³, covering everything from generous private pools to semi-commercial installations. Running on three-phase 400 V at 13.3 A, it uses a Mitsubishi rotary compressor and R32 refrigerant — a gas with roughly three times lower global warming potential than R410A — to deliver class-leading seasonal efficiency under an EU Energy Label A rating. The vertical footprint (920 × 910 × 1 020 mm) keeps ground-level space requirements modest while the upright cabinet promotes natural airflow in plant-room corners or tight pool-surround positions.

Colecția COP și colecția sezonieră

The full-inverter drive continuously modulates compressor and fan speed to match real heat demand, producing output anywhere between 8.8 kW and 31.2 kW rather than cycling on and off at a fixed rate. This translates directly into lower average energy draw: the COP range of 6.1–15.7 at A27/W27 means the unit can return up to roughly 15 units of heat per unit of electricity consumed under warm summer conditions. As an all-season design, the 31TV/32 operates reliably down to −15 °C ambient, so the heating season can begin in early spring and extend well into autumn without risk of the unit tripping on a cold night.

Refrigerant, Compressor & Corrosion Resistance

The Mitsubishi rotary compressor is paired with a titanium-twisted heat exchanger that resists both salt and chlorine, making the unit fully compatible with salt-chlorinated and traditionally dosed pools alike. R32 refrigerant keeps the circuit’s global warming potential low while supporting high-efficiency thermodynamic cycles. A soft-start function eliminates voltage spikes on energisation — an important consideration for installers on shared electrical supplies or where cable runs are long.

Controls, Connectivity & Installation

A full-colour touchscreen provides local control of temperature setpoints, operating modes (Power / Smart / Silent), and defrost cycles, while the built-in Wi-Fi and 4G module allows remote monitoring and scheduling via smartphone app without needing a separate gateway. The 50 mm hydraulic connection suits standard pool pipework, and the unit arrives CE-marked and ready for the European market. Automatic heating and cooling modes give installers and owners the flexibility to chill overheated water during summer heat waves as well as warm it in cooler periods.