Conjunto do cesto do filtro fino Maytronics Dolphin E10 S1 - 9991461-ASSY

Maytronics Dolphin E10 fine filter basket assembly S1

This is the genuine Maytronics monoblock fine filter basket (S1) for the Dolphin E10 robotic pool cleaner and a wide range of compatible S-series and entry-level Dolphin robots. Housed in a single-piece monoblock cartridge frame, it sits inside the robot’s top-load filter compartment and captures fine debris — including hair, insects, leaves and small particles — as the robot circulates pool water through its filtration system. It is a direct OEM replacement, manufactured to the original specification and tolerances.

Function and filtration performance

The fine filter basket is the primary filtration stage in the Dolphin E10’s filter bay. Its mesh panels intercept fine debris suspended in the water column while maintaining adequate flow to keep the robot’s drive motor running efficiently. A blocked or torn basket will reduce suction, leave visible debris in the pool and may trigger the robot to abort its cleaning cycle early. Replacing a worn basket restores full filtration performance immediately.

Modelos Dolphin compatíveis

This S1-format basket is confirmed compatible with the Dolphin E10, S50, S100, Active 10, Active 15, Active Solo, T15, T25, Echo, Escape, Encore, Nautilus CC, Proteus DX3, Advantage, Cayman, Explorer E20, PoolBot PB10, PoolBot PB20, PoolBot PB25, Evolution 10, Avalon 20, EX10, CARRERA 20, Seamaster CL, Seamaster AG, SX 10, SX 20, SM 10, SM 20, POOLSTYLE, POOLSTYLE PLUS, POOLSTYLE ADVANCED, FORMULA 20, FON 20, ENERGY C, RUN 10, MR 20, ZFUN, Blue Maxi 10, Blue Maxi 20, IZZY CLIMB, Cainan 1, CLASSIC LIGHT and others in the S1 platform. Always cross-check your robot’s parts list before ordering.

When to replace the filter basket

Replace the basket when the mesh is visibly torn, deformed or clogged with debris that cannot be cleared by rinsing. Other signs include the robot leaving visible fine dirt on the pool floor after a completed cycle, reduced water flow through the filtration chamber, or the basket frame cracking and failing to seat securely in the top-load compartment. The integrated handle also takes mechanical stress during each removal — inspect it for fatigue cracks at the hinge points.

Why fit a genuine Maytronics part

Genuine Maytronics filter baskets are manufactured to exact mesh aperture, frame rigidity and dimensional tolerances required by the Dolphin E10 filter bay. An aftermarket basket with incorrect mesh sizing or a loose-fitting frame can allow debris to bypass filtration entirely or restrict flow sufficiently to overheat the pump motor. Fitting an authentic OEM part protects the robot’s warranty and guarantees the filtration performance Maytronics designed the machine to deliver.