Profec - Elbow 90° PVC-U 110mm Glue Socket 16 bar Grey - 0110114

Profec – Elbow 90° PVC-U 110mm Glue Socket 16 bar Grey

At 110 mm internal diameter and rated to 16 bar, this large-bore elbow is the go-to choice for high-flow pool pipework runs — managing main circulation lines, backwash returns, and plant-room headers where standard smaller fittings simply cannot cope with the volume. Both sockets share identical 118 mm centre-to-back dimensions, delivering a perfectly symmetrical 90° change of direction. Manufactured in PVC-U, it bonds permanently with standard solvent cement in line with EN-ISO 1452-3.

Pressure rating & standards compliance

The 16 bar pressure rating gives a generous safety margin for pool and industrial pressure systems alike, far exceeding the working pressures typical of domestic and commercial pool circulation (usually 1–4 bar). All glue-socket connections conform to EN-ISO 1452-3, ensuring dimensional compatibility with metric PVC-U pipe and fittings from other compliant manufacturers across Europe.

Solvent-cement connection & installation

Both ends accept a glue (solvent cement) socket connection, creating a chemically fused, leak-free joint that requires no mechanical couplers or O-rings. The 110 mm bore makes this fitting suitable for main suction and return headers serving large commercial or Olympic-class pools, as well as high-capacity filter and backwash lines on club or resort installations. Correct pipe preparation — deburring, chamfering, and priming — is essential before cementing.

Material & chemical resistance

Unplasticised PVC (PVC-U) resists chlorinated water, salt solutions, and most pool chemicals encountered in day-to-day water treatment, and will not corrode or scale in the way that metal pipework can. The grey finish is standard for metric pressure pipework in European pool and industrial installations, helping to distinguish pressure lines from drainage.