Pressure Pipe PE100 225 mm × 13.4 mm Plain SDR17 10 bar Black/Blue 12 m DVGW - 7023752

Pressure Pipe PE100 225 mm × 13.4 mm Plain SDR17 10 bar Black/Blue 12 m DVGW

With a 225 mm outside diameter, 13.4 mm wall thickness, and a 10 bar pressure rating, this 12-metre PE100 straight-length pipe is one of the largest-bore SDR17 sticks commonly stocked for commercial pool plant rooms, water treatment facilities, and bulk water transfer infrastructure. The black core with co-extruded blue stripe identifies it as a below-ground pressure water line, and DVGW certification confirms it meets German technical guidelines for drinking-water installations — a benchmark widely accepted across European water utilities.

Pipe Material & Pressure Class

PE100 is a high-density polyethylene grade with a Minimum Required Strength (MRS) of 10 MPa, which — combined with the SDR17 geometry — yields a nominal pressure class of PN10. The plain (spigot) ends are compatible with electrofusion sleeves, butt-fusion welding, or mechanical compression couplings, giving installers a choice of jointing method to suit site conditions. Polyethylene’s inherent flexibility allows the pipe to accommodate fluctuating operating pressures without fatigue, keeping the system leak-free over its service life.

Typical Applications & Installation

At 225 mm OD this pipe is well suited to main supply headers in large commercial or public pool complexes, pump-house ring mains, bulk water transfer, irrigation trunk lines, and geothermal or district-heating groundwork. The plain-end format is supplied in a full 12-metre stick, minimising joint count in long runs and reducing installation time on open-trench projects. PE100 outperforms metallic alternatives in corrosion resistance and requires no protective coating underground.

Compliance & Identification

DVGW approval is the key European-market credential for pressure water pipe, verifying dimensional conformity and material traceability. The distinctive black-body / blue-stripe colouring provides immediate visual identification as a potable-water-rated pressure main, in line with European colour-coding conventions. Installers should verify that the operating system pressure at maximum temperature does not exceed the 10 bar PN rating, and should follow local regulations regarding trench bedding and backfill for large-bore PE pipe.