AstralPool - Replacement Floating Cable 18 m (4-Pin DIYA, Grey) for Pulit Advance 3 Plus - WA00370DIYA

AstralPool – Replacement Floating Cable 18 m (4-Pin DIYA, Grey) for Pulit Advance 3 Plus

This is the genuine AstralPool replacement floating cable for the Robot Pulit Advance 3 Plus (ref. 63175). Measuring 18 metres in length with a grey finish and a 4-pin DIYA connector, it carries power and signal between the robot cleaner and its power supply unit. It corresponds to position 20 in the official Fluidra exploded-view diagram for this model.

Compatibility

Designed and specified exclusively for the AstralPool Robot Pulit Advance 3 Plus (parent SKU 63175). Always verify your robot’s model reference before ordering, as other Pulit Advance variants (5 Plus, 7 Plus) use cables of different lengths and may use different connector types. If in doubt, cross-reference against the official Fluidra exploded-view diagram for your unit.

Why Genuine Matters

A damaged or degraded cable is one of the most common causes of power loss and electrical faults in robotic pool cleaners. UV exposure, pool chemicals, and repeated coiling all stress the cable jacket and connector seals over time. Using a genuine AstralPool cable ensures the correct conductor gauge, insulation rating, and watertight 4-pin DIYA connector — protecting both the robot and the power supply unit from damage caused by substandard aftermarket substitutes.

Installation

Disconnect the robot from the power supply before starting any work. Unplug the existing cable at the DIYA connector on the robot body and at the power supply unit, then route the new 18 m cable in the same path, ensuring there are no kinks. Always test for correct operation before returning the robot to the pool. Cable replacement may require basic technical knowledge; if you are unsure, consult a qualified pool technician.