Salta al contenuto

Poolstar Freeflo Racer filtration pump prefilter basket - R0007

Poolstar R0007
1-3 settimane
21,45  tasse inc.
Spedizione Spedizione 1-3 settimane
Certificato Certificato negozio online
Resi facili Resi facili entro 14 giorni
Ricambio Cerchi un pezzo di ricambio?
Vai alla vista esplosa
Domanda Cercando consigli?
Fai la tua domanda

Poolstar Freeflo Racer filtration pump prefilter basket

This is the OEM prefilter basket for the Poolstar Freeflo Racer filtration pump range, sitting inside the pump’s strainer housing between the pool’s suction line and the impeller. Its mesh construction catches leaves, hair, and coarse debris before they reach the pump internals, keeping water flowing freely through the hydraulic circuit.

What this prefilter basket does in the Freeflo Racer

The basket intercepts all solid debris drawn in through the suction line before it can contact the impeller. A clogged or cracked basket lets debris bypass the strainer chamber, accelerating impeller wear and risking a hydraulic blockage. Replacing it restores the pump’s first line of mechanical protection and maintains rated flow rate across the full filtration cycle.

Which Freeflo Racer models it fits

This basket is confirmed to fit the Poolstar Freeflo Racer filtration pump range, specifically models FFL-031, FFL-051, FFL-071, FFL-101, and FFL-151. These span the 0.33 to 1.5 HP single-phase variants of the Freeflo pump series. Do not fit this basket to unrelated Poolstar product lines without cross-referencing the strainer housing dimensions.

Signs it needs replacing

Inspect the basket whenever you open the strainer lid. Replace it immediately if you see cracks, warped walls, or any splits in the mesh — even a small hole allows fine debris to pass through to the impeller, causing progressive wear. A basket that no longer seats flush in the housing or rattles under flow has also reached the end of its service life and should be swapped out before the next filtration cycle.

How to install it

Switch the pump off and isolate the suction and discharge valves. Unscrew or quarter-turn the Cam and Ramp lid — no tools required on most Freeflo configurations. Lift out the old basket, rinse the strainer chamber, and drop the new basket in until it seats fully. Refit the lid, open the valves, and re-prime the pump. The whole procedure takes under five minutes.

Informazioni aggiuntive

Marchio: Poolstar
Tipo: Prefilter basket (pump strainer basket)
Materiale: HDPE
Compatibile con: Freeflo Racer FFL-031, FFL-051, FFL-071, FFL-101, FFL-151
Peso: 0.16 kg
Inclusi: 1 prefilter basket
Poolstar part reference: R0007

Questo pezzo di ricambio è adatto per: