Itap York 108 sárgaréz talpszelep, DN20, 3/4", belső menetes, PN12
Szállítás 1–3 hét
Tanúsított online áruház
Egyszerű visszaküldés 14 nap
Tanácsra van szükséged?
Itap York 108 Brass Foot Valve DN20 – 3/4″ Female Thread, PN12 with Stainless Steel Strainer
The Itap York 108 is a compact, heavy-duty foot valve designed for suction-side pump installations in pools, irrigation systems, and water supply networks. Manufactured in Italy from dezincification-resistant brass, the valve prevents backflow and keeps the pump primed when the system is at rest. The integrated stainless steel 304 mesh strainer at the inlet protects the pump and downstream components from particulate matter, making it equally suitable for open water sources, wells, and cisterns.
The valve body is machined from brass and sealed with an NBR disc that opens under inlet pressure and closes immediately when flow reverses, providing reliable one-way performance across a wide temperature range of -20 °C to +100 °C. The strainer basket is fabricated from stainless steel 304, while internal spring components are stainless steel 302, ensuring long-term corrosion resistance even in aggressive water conditions. The white polymer lower housing bridges the brass body and the strainer, allowing straightforward field inspection and cleaning.
Műszaki adatok
- Modell: York 108
- Névleges átmérő: DN20
- Thread size: 3/4 inch female thread (BSP)
- Working pressure (PN): 12 bar
- Total length: 82 mm
- Szeleptest hossza: 42 mm
- Strainer section length: 42 mm
- Across-flats (body hex): 78 mm
- Port / orifice diameter: 7.4 mm
- A test anyaga: sárgaréz
- A szűrő anyaga: 304-es rozsdamentes acél
- A rugó anyaga: 302-es rozsdamentes acél
- Tömítés anyaga: NBR
- Hőmérsékleti tartomány: -20 °C és +100 °C között
- Csatlakozási típus: Mindkét végén belső menet
- Eredet: Olaszországban készült
Kompatibilitás
The York 108 DN20 is designed to connect directly to any 3/4 inch BSP male-threaded pump inlet or suction pipe fitting. It is suitable for centrifugal surface pumps, submersible pump suction lines, drip and sprinkler irrigation systems, greenhouse water supply, and pool make-up water circuits. The NBR seal is compatible with cold and hot fresh water, light chlorinated water, and general agricultural water supplies within the stated temperature and pressure limits. Not recommended for petroleum-based fluids or solvents.
További információk
| Márka: | Itap |
|---|---|
| Modell / Típus: | York 108 |
| Szeleposztály: | Lábszelep szűrővel |
| Névleges átmérő: | DN20 |
| Menetméret: | 3/4 hüvelyk |
| Csatlakozási típus: | BSP belső menet |
| Üzemi nyomás: | 12 bar (PN12) |
| Teljes hossz: | 82 mm |
| Valve body length: | 42 mm |
| Strainer length: | 42 mm |
| Across-flats (hex): | 78 mm |
| Orifice diameter: | 7.4 mm |
| A karosszéria anyaga: | Sárgaréz |
| A szűrő anyaga: | 304-es rozsdamentes acél |
| A rugó anyaga: | 302-es rozsdamentes acél |
| A tömítés anyaga: | NBR |
| Alsó ház anyaga: | Polymer (white) |
| Hőmérsékleti tartomány: | -20 °C és +100 °C között |
| Áramlási irány: | Egyirányú (visszacsapó funkció) |
| Gyártási ország: | Olaszország |
Részletekben
- Compact 82 mm overall length fits confined pump chambers and valve pits
- Integrated SS 304 strainer eliminates the need for a separate in-line filter on the suction side
- PN12 rating provides a healthy safety margin over typical 4–6 bar domestic pump systems
- Wide temperature tolerance (-20 °C to +100 °C) suits seasonal outdoor and greenhouse installations
- All-metal brass body with stainless steel internals resists corrosion in well and open-water applications
- One-way (non-return) function only — cannot be used as an isolation valve
- 3/4 inch female thread on both ports requires male-threaded pipe or adaptors; no push-fit or compression option
- NBR seal is not compatible with oils, fuels, or aggressive chemicals outside the stated fluid types
