Salta al contingut

Replacement cell type SSC25E - 7006225

Bevo 7006225
Exhaurit
1.254,45  impostos inclosos.
Certificat Certificat botiga en línia
Devolucions fàcils Devolucions fàcils dins 14 dies
Pregunta Busques consell?
Fes la teva pregunta

Replacement cell type SSC25E

Rated at 25 g/h chlorine output, this replacement electrolysis cell is the direct service part for Emaux SSC25-E salt chlorinators used in residential and semi-commercial pools. The cell ships complete with top cover and O-rings, so the swap can be carried out in a single maintenance visit without sourcing additional seals. Constructed with ruthenium-coated titanium electrode plates, it is built to withstand the demanding electrochemical environment of continuous salt-water electrolysis.

Electrolysis output & pool sizing

At full rated output of 25 g/h, this cell is matched to pools where the SSC25-E controller was originally specified — typically residential pools up to roughly 50 m³. Because the chlorine production rate can be dialled back on the control unit, the cell also performs well in smaller pools run at a reduced duty cycle, extending electrode life in the process. Maintaining pool salinity in the 4,000–6,000 ppm range (using 99 % pure NaCl) is essential to protect the titanium plates and achieve the rated output.

Salt-cell life & care

Cell longevity depends heavily on polarity-reversal frequency and scale management: a reversal interval of at least four hours is recommended to prevent premature wear of the titanium coating. Annual electrode cleaning with a dedicated liquid cell cleaner, combined with closing the chlorinator bypass during filter backwashing, will limit calcium scale build-up and keep efficiency high. Removing the cell before winterisation protects it from damage during cold-weather shut-down periods.

Compatibility & fitment

This cell is a verified replacement for SSC25-E and SSC45-E units and uses the same cell-housing connection as the original factory part, ensuring correct communication with the control board and preventing spurious error codes. Confirm the connector type on units manufactured before 2017, as the connection profile may differ. The cell housing plumbs into the return line after the filter via standard union fittings.

Informació addicional

Marca: Sense marca
Model / Tipus: SSC25E
Tipus de peça: Replacement Cell Type Ssc25E

En detall

Replacement cell type SSC25E – 7006225
1.254,45 
  • Direct OEM-spec fit for SSC25-E and SSC45-E units
  • Titanium electrode plates for long service life
  • Ships with cover and O-rings — no extra seals needed
  • Adjustable output suits pools of varying volume
  • Restores full 25 g/h chlorine production at minimal running cost
  • High unit cost — budget for periodic cell replacement cycles
  • Pre-2017 units may require connector compatibility check before fitment