Norsup bomba de calor, tipus Px inversor (tipus P17X/32) vista desmuntada i peces de recanvi

Norsup Heat Pump, Type PX Inverter (Type P17X/32) — exploded view & spare parts

This page provides the official exploded-view diagram and full bill of materials (BOM) for the Norsup Heat Pump Type PX Inverter in the P17X/32 configuration, carried under Norsup factory reference 7024627. The P17X/32 is a 230 V AC full-inverter swimming pool heat pump rated at up to 17 kW, designed for pools of approximately 40–75 m³, and uses R32 refrigerant. The diagram covers every serviceable component of the unit — from the refrigerant circuit and evaporator section through to the electrical enclosure and casing panels. Whether you are a pool technician tracing a fault or a pool owner sourcing a single replacement component, the numbered diagram and parts list below will help you pinpoint and order the exact part you need in minutes.

Com utilitzar el diagrama numerat per trobar la teva peça

Every call-out number printed on the exploded-view diagram corresponds directly to a row in the parts list table beneath it — locate the area of the unit where your fault or wear is occurring, then find the matching number on the diagram. Once you have the position number, cross-reference it with the parts list to retrieve the part description and, where available, the Norsup SKU. Not every position has an individually orderable SKU: some components — such as the chassis (pos. 10), the evaporator (pos. 20), and several structural panels — are shown in the diagram for identification purposes but are serviced as part of a larger assembly or supplied on request. Where a SKU is listed, that is the exact part number to quote when adding the item to your basket. Pay particular attention to position 35, which in this diagram covers several accessories and ancillary parts — including temperature sensors, rubber feet, drain hoses, and a winter cover — listed together in a single row; read the full description carefully to confirm you are selecting the correct accessory. If you are unsure whether a part listed without a SKU is available to order, contact our team before purchasing a related assembly.

Main replaceable assemblies on the Norsup P17X/32

The P17X/32 is built around four broad sub-systems, each of which contains individually replaceable components shown in the diagram. The circuit de refrigerant comprises the compressor (pos. 9), the 4-way reverse valve (pos. 1) that switches the unit between heating and cooling modes, the electronic expansion valve (pos. 2) that meters refrigerant flow, and the high- and low-pressure switches (pos. 32 and pos. 30 respectively, with SKUs 7011008 and 7011009) that protect the circuit from overpressure or loss-of-charge conditions. The refrigerant-to-water heat transfer section centres on the titanium heat exchanger for the P17X/32 (pos. 8, SKU 7025372), which is the primary surface across which heat passes into the pool water; the water flow switch with 32 mm glue adapter (pos. 4, SKU 7006471) sits on the water side and prevents the unit from running without adequate flow. The air-side section includes the evaporator coil (pos. 20), the 500 mm × 145 mm anti-clockwise fan blade with a 10 mm bore (pos. 16, SKU 7024880), the fan motor ZWS75-A (pos. 17, SKU 7024943), its bracket (pos. 19), and the fan protection net (pos. 15). The recinte elèctric houses the main control board 2AC32I12WO1 (pos. 24, SKU 7024938), the LED display for the P-series (pos. 13, SKU 7024942), the power supply (pos. 25), relay (pos. 27), reactance (pos. 28), and the wiring connectors — the 5-way wire connector (pos. 12, SKU 7011025) and the 2-way wire connector (pos. 26, SKU 7011019). The pressure meter for R32 gas rated 0–55 bar at −15 °C (pos. 34, SKU 7026259) provides a visible indication of refrigerant charge status. Structural elements — the top lid 1115 × 430 mm (pos. 23, SKU 7033048), front, back, right, and middle panels (pos. 18, 21, 7, and 14), and the supporting and chassis panels (pos. 22 and 10) — complete the enclosure and are shown in the diagram to assist with panel identification after accidental damage.

Tria entre variants i mides de paquet

The BOM for the P17X/32 does not feature lettered sub-variants (such as 10a/10b) for the currently stocked positions, so each position number maps to a single part at this time. However, several parts carry tightly specified dimensional tolerances that must be matched exactly: the fan blade at position 16 is specified as 500 mm × 145 mm with a 10 mm centre hole and an anti-clockwise rotation direction — fitting a blade with a different diameter, pitch, or rotation sense will affect airflow performance and may place undue load on the fan motor. Similarly, the water flow switch at position 4 is sized for a 32 mm glue socket connection; if your pipework is a different diameter, the correct adapter must be sourced separately. For refrigerant-side components such as the pressure switches (pos. 30 and pos. 32), always verify the trip and reset pressures stated in the description — the low-pressure switch (0.3 MPa/0.15 MPa) and the high-pressure switch (3.2 MPa/4.4 MPa) are not interchangeable even if they appear physically similar. If you are uncertain which variant suits your unit, quoting the factory reference 7024627 to our team will allow us to confirm compatibility before you order.