Profec - Cot de 90°, PVC-U, 75 mm, racord cu lipire, 16 bar, gri - 0110112

Profec – Elbow 90° PVC-U 75mm Glue Socket 16bar Grey

Rated to a full 16 bar working pressure and sized at 75 mm internal diameter, this injection-moulded PVC-U elbow delivers a precise 90° change of direction in pool plant-room pipework where pump outlets, filter connections, and heat-pump headers demand a robust, chemical-resistant fitting. Both sockets share an 82 mm centreline depth (Cb), giving consistent engagement depth for a reliable solvent-cement bond. Conforming to EN-ISO 1452-3, it integrates directly with standard metric PVC-U pressure pipe.

Solvent-cement connection & fit

The twin glue-socket ends accept standard 75 mm PVC-U pipe with the even cement-channel engagement typical of Profec metric fittings. Solvent-cement jointing creates a homogeneous, leak-free bond that withstands both the working pressure and the chlorinated water environment of pool circulation systems — no seals or clamps required once cured.

Rezistența la materiale și substanțe chimice

Unplasticised PVC (PVC-U) is inherently resistant to chlorine, salt water, most pool chemicals, and UV degradation, making it the material of choice for above-ground and buried pool pipework alike. The grey colouring is standard for pressure-rated metric PVC-U fittings, distinguishing them at a glance from lower-rated drainage grades on busy installation sites.

Sizing to your pool plant room

At 75 mm, this elbow suits mid-to-large residential and commercial pool installations — typically those served by high-flow circulation pumps of 15 m³/h and above — where 63 mm pipework would restrict flow. It pairs naturally with Profec straight couplings, tees, and reducers from the same grey metric range for a consistent, all-Profec pipework assembly.