Țeavă sub presiune din PVC-U 200 mm × 7,7 mm, cu capăt de lipit × capăt neted, 10 bar, ISO-PN10, gri, 5 m - 0309095

Pressure Pipe PVC-U 200mm × 7.7mm Glue Socket × Plain 10 bar ISO-PN10 Grey 5m

At 200 mm outside diameter with a 7.7 mm solid wall, this PVC-U pressure pipe is rated to 10 bar (PN10) in accordance with ISO 1452, making it one of the largest-bore solvent-weld pipe sections commonly used in high-volume pool plant rooms, water parks, and commercial filtration installations. Each length is 5 metres and arrives with one integral glue socket and one plain (spigot) end, so consecutive sticks join without additional couplers. The grey, unplasticised PVC-U construction is chemically inert against pool-water additives and chlorinated media.

Vessel construction & wall integrity

The pipe is extruded as a solid-wall section — no foam core — giving a consistent 7.7 mm wall around the full 200 mm bore. PVC-U’s smooth internal surface produces very low fluid resistance, supporting high flow rates with minimal head loss; this is critical when sizing large recirculation loops where even modest friction losses compound across multiple pipe runs. The rigid, unplasticised compound also resists creep under sustained pressure, an important consideration in buried or concealed plant-room pipework that cannot easily be re-accessed.

Glue-socket connection & installation

The integral glue (solvent-weld) socket on one end is sized to accept a matching 200 mm plain-end spigot — whether from the next stick of pipe or from a PN10-rated fitting. Solvent cement forms a monolithic joint that is essentially as strong as the pipe body itself once cured; no separate coupler or rubber ring is required for socket-to-plain joints. Cuts to length are made with a hand saw or mechanical pipe cutter; the cut plain end should be chamfered and degreased before cementing to ensure a full, leak-free bond.

Standards compliance & application scope

Conforming to ISO 1452 PN10, this pipe is specified for pressurised water supply, buried and above-ground drainage, and general industrial water circuits — all directly applicable to pool plant installations. The grey colour is the recognised European convention for PVC-U pressure pipe, aiding identification in mixed-service plant rooms. At this diameter, typical applications include main suction and return headers serving large commercial pools, pump-station manifolds, and filter vessel inlet/outlet pipework where substantial flow capacity is required.