Pressure Pipe PE100 110mm × 6.6mm Plain SDR17 10 bar Black/Blue 12m DVGW - 7023747

Pressure Pipe PE100 110mm × 6.6mm Plain SDR17 10 bar Black/Blue 12m DVGW

Rated to 10 bar (PN10) at 20 °C with a 110 mm outside diameter and a 6.6 mm wall thickness, this 12-metre straight-length PE100 pipe delivers the flow capacity needed for large-pool main supply runs, plant-room pipework, and buried water-distribution circuits. The SDR17 Standard Dimension Ratio gives a lighter, more manageable stick than thicker-walled SDR11 pipe, while still covering every realistic head of pressure a pool circulation or water-supply system will produce. German DVGW approval confirms the pipe meets rigorous European quality and safety standards for pressurised water applications.

Material & Pressure Integrity

Manufactured from high-density PE100 polyethylene — the highest-grade standard polyethylene material — this pipe carries a Minimum Required Strength (MRS) of 10.0 MPa, from which the 10 bar PN10 rating is formally derived under EN 12201. PE100 resists corrosion, chlorine, salts, and the wide range of chemicals present in pool water and groundwater alike, and polyethylene pipe systems are designed for a service life of 50 years at rated pressure and temperature, outperforming metallic alternatives and minimising costly maintenance. The characteristic black core with co-extruded blue stripe identifies this as a below-ground water-service pipe, making it immediately recognisable during installation and future excavations.

Jointing & Installation

The plain (spigot) ends are sized for electrofusion or butt-fusion welding, producing permanent joints that are typically stronger than the pipe body itself — with no gaskets, no bolts, and no potential leak paths. At DN110, the pipe is supplied in straight 12-metre lengths rather than coils, which suits trenched plant-room and pool-surround installations where longer unjointed runs reduce the total number of welds required. The SDR17 wall proportion keeps the pipe noticeably lighter and easier to handle than equivalent SDR11 sections, simplifying placement in confined pool-plant rooms or narrow service trenches.

Sizing & Suitable Applications

A 110 mm outside diameter provides a nominal bore of approximately 96 mm, giving ample cross-section for high-flow pool circulation systems, heat-pump supply lines, water-feature mains feeds, and buried ring-main distribution on larger commercial pool installations. The 10 bar pressure rating is more than sufficient for pool pump delivery pressures, which rarely exceed 3–4 bar in practice, while DVGW certification means the pipe can also be used on potable-water supply runs where the authority permits a black/blue PE material.