Motor de tração ultra premium Astralpool Xtreme 2 & 3 - S1A5004

Astralpool Xtreme 2 & 3 ultra premium traction motor

This is the genuine OEM ultra premium traction motor for the Astralpool Xtreme 2 and Xtreme 3 robotic pool cleaners. It is the dedicated drive motor — part number 46 on the exploded-view diagram — responsible for powering the tracks and propelling the robot across the pool floor, walls and waterline. Without a correctly functioning traction motor, the robot cannot navigate or complete its cleaning cycle.

Function and role in the drivetrain

The traction motor converts low-voltage DC electrical energy into rotational torque, which is transmitted via drive belts to the crawler tracks on each side of the robot. This motor is entirely separate from the pump/impeller motor: it solely governs movement, direction changes and wall-climbing ability. Any loss of drive power, erratic direction changes or a robot that spins in one place points directly to this component.

Compatibilidade

This part is confirmed for the Astralpool Xtreme 2 (ref. 49798) and Xtreme 3 (ref. 49799) robotic pool cleaners. It is listed as part 46 on the Xtreme 2 exploded diagram and part 46 on the Xtreme 3 exploded diagram. Always cross-reference your model reference number before ordering, as the Xtreme range shares a platform with other Aquatron-based robots but motor grades differ between tiers.

Sintomas que indicam a necessidade de substituição

Replace this motor when the robot fails to move or moves only in one direction, when it stalls on slopes or cannot climb walls it previously managed, when the motor emits unusual grinding or humming under load, or when inspection reveals the motor shaft has seized. A robot that runs its pump perfectly but remains stationary almost always has a failed traction motor rather than a belt issue.

Why genuine Astralpool parts matter

The ultra premium grade denotes a higher-specification motor winding and internal seal standard compared to the standard traction motor variant listed for earlier Xtreme models. Using a genuine Astralpool replacement ensures correct torque output, IP-rated waterproofing integrity and full compatibility with the robot’s PCB motor driver stage. Aftermarket substitutes with mismatched winding resistance can stress the control board and cause secondary failures that cost far more to repair.