AstralPool Pump Maxim SS 3,5 HP 230/440V III - 08003
Certificado loja online
Devoluções fáceis em até 14 dias
Lista de peças sobressalentes
AstralPool - Porca para chave inglesa - 4405010379
109,95 €
AstralPool - Porca de cobertura - 4404180102
24,95 €
AstralPool - Tampa do pré-filtro - 4405010302
34,95 €
AstralPool - O-ring 192 x 5 mm - 4405010373
4,95 €
AstralPool - Cesto de pré-filtragem 8 L - 4405010304
79,95 €
AstralPool - Conjunto de juntas de sucção/descarga - 4405010375
4,95 €
AstralPool - Kit de ligação com união de 90 mm - 4405010306
139,95 €
AstralPool - Kit de ligação com união de 3" - 4405010764
104,95 €
Tampa da válvula Astralpool de 1/4'' - 4404121107
3,95 €
AstralPool - Conjunto de pré-filtro 8 L - 4405040701
144,95 €
AstralPool - O-ring 126 x 3,5 mm - 4405011412
34,95 €
AstralPool - Kit de parafusos de fixação e suportes - 4405010380
114,95 €
AstralPool - O-ring 100 x 4 mm - 4405010376
4,95 €
AstralPool - União hidráulica de base ≤4,5 HP - 4405010313
119,95 €
AstralPool - Base da bomba / pé - 4405010315
94,95 €
AstralPool - Pump body 3.5 HP - 4405010307
184,95 €
AstralPool - Conjunto de parafusos do corpo da bomba - 4405010311
89,95 €
AstralPool - Tampão do impulsor - 4405010338
9,95 €
AstralPool - Impulsor 3,5 HP III 50 Hz - 4405010323
44,95 €
AstralPool - Impulsor 3,5 HP III 60 Hz - 4405010765
84,95 €
AstralPool - Vedação mecânica - 4405010322
164,95 €
AstralPool - O-ring 226 x 6 mm - 4405010378
19,95 €
AstralPool - Suporte para vedante mecânico 3,5 HP - 4405010334
109,95 €
AstralPool - Motor bracket 3.5 HP - 4405010332
94,95 €
AstralPool - Arruela defletora 24x50x6 mm - 4405010374
4,95 €
AstralPool - Conjunto de tirantes para motor de 3,5 HP - 4405010361
19,95 €
AstralPool - Tampa frontal do motor 2,5-3 HP (Bonora) - 4405010369
184,95 €
AstralPool - Tampa frontal do motor 2,5-3 HP (Vernis) - 4405010381
64,95 €
AstralPool - Kit de rolamentos 6205 2RS, 3,5 HP - 4405010171
94,95 €
AstralPool - Terminal box kit 3.5 HP (Vernis) - 4405010545
59,95 €
AstralPool - Kit de caixa de ligações C.80-90 III - 4405010157
14,95 €
AstralPool - Kit de caixa de ligações 2,5-3-4,5 HP - 4405030119
59,95 €
AstralPool - Tampa traseira do motor de 3,5 HP (Bonora) - 4405010367
64,95 €
AstralPool - Rear motor cover 2.5-3-3.5 HP (Vernis) - 4405010382
39,95 €
AstralPool - Tampa traseira do motor C.90 E - 4405011415
29,95 €
AstralPool - Junta em V 2,5-3 HP II - 4405010176
44,95 €
AstralPool - Kit de ventoinha e tampa - 4405011400
54,95 €
AstralPool - Kit de cobertura para ventilador - 4405011417
59,95 €
Informação adicional
| Marca: | AstralPool |
|---|---|
| Séries: | Maxim |
| Potência: | 3.5 HP |
| Velocidade: | 2860 rpm |
| Ligação: | 3" |
| Proteção do motor: | IP55 |
| Pre-filter capacity: | 8 litres |
Descrição
AstralPool – Maxim 3.5 HP pool pump
The AstralPool Maxim 3.5 HP is a high-capacity single-speed pool circulation pump engineered for large residential and semi-commercial pools. Running at 2,860 rpm with a 3.5 HP motor, it delivers the flow rates required for pools with large water volumes, long pipe runs, or high-resistance filtration systems. The Maxim series has long been a trusted choice for professional pool builders and maintenance contractors across Europe and beyond.
The pump body and supports are manufactured from glass-reinforced thermoplastic, offering excellent chemical resistance against chlorine, salt, and algaecide treatments. The motor shaft tip is made from AISI-316 stainless steel, providing corrosion resistance in wet environments, and the motor is double-insulated with IP55 protection — suitable for outdoor installation in exposed locations.
Pre-filter and hydraulics
The Maxim integrates an 8-litre pre-filter basket with a transparent lid, allowing easy visual inspection of debris accumulation without switching off the pump. The large basket capacity reduces the frequency of cleaning intervals on heavily loaded pools. The pump uses 3-inch threaded connections, accommodating high-flow pipework for installations requiring maximum hydraulic performance.
Instalação e compatibilidade
The Maxim 3.5 HP installs on a standard pump base with 3″ threaded inlet and outlet connections. It is compatible with sand, cartridge, and diatomaceous earth filter systems. A comprehensive range of OEM spare parts is available, including impellers, mechanical seals, motor covers, pre-filter baskets, O-rings, and terminal boxes, supporting long service life and straightforward on-site servicing.
