Zodiac - Cable glands kit - R0569500

Zodiac – Cable glands kit – R0569500

The Zodiac Cable Glands Kit (R0569500) is an official Zodiac replacement accessory designed to provide secure, watertight cable entries for pool control units and automation equipment. The kit contains a comprehensive assortment of cable gland fittings — specifically 2 x M12, 9 x M20, and 1 x M25 — covering the range of cable diameters typically encountered in pool electrical installations. Cable glands serve the essential function of sealing the points where cables pass through enclosure walls, preventing water ingress, dust, and mechanical strain on the cable connections inside the unit.

Proper cable gland fittings are a fundamental safety and reliability requirement in pool environments, where moisture and chemical exposure are constant factors. By replacing worn, cracked, or missing glands with this original Zodiac kit, installers and pool technicians can restore the IP-rated integrity of the enclosure and ensure that wiring connections remain protected over the long term. The mixed sizing in this kit — M12 for smaller sensor cables, M20 for standard power and control cables, and M25 for larger cable runs — reflects the real-world cabling needs of Zodiac pool automation and control systems.

Technical details and composition

This sachet kit provides a total of 12 cable gland fittings across three metric thread sizes. The M12 glands are suited to thin sensor cables and data wires. The M20 glands, supplied in the greatest quantity at nine pieces, accommodate the majority of standard pool equipment cables including pump, heater, and valve wiring. The single M25 gland handles heavier or larger-diameter cables where needed. All fittings are designed to thread directly into standard knockout or pre-tapped enclosure ports as used across the Zodiac product range. The fittings are referenced in multiple Zodiac catalogue editions including 2015, 2018, and 2020, confirming their long-standing compatibility with Zodiac pool automation systems.

Suitability and application

This cable glands kit is intended for use with Zodiac pool control units, automation panels, and similar electrical enclosures used in residential and commercial pool installations. It is the correct replacement part when cable glands are damaged, missing, or need to be replaced during a system service or upgrade. Because it is an original Zodiac spare part carrying part number R0569500, it ensures dimensional and material compatibility with Zodiac enclosures. It is suitable for both new installations requiring additional gland fittings and for maintenance scenarios where existing glands have deteriorated. Pool technicians and qualified electricians working with Zodiac automation products will find this kit a practical, all-in-one solution covering the most common cable entry sizes in a single order.