Zodiac 220 V power supply cable fixing clip – R0742900

Zodiac 220 V power supply cable fixing clip R0742900

The Zodiac 220 V power supply cable fixing clip R0742900 is the original clamp used to secure the mains power cable on Zodiac salt chlorinators.
It holds the 220 V supply lead firmly against the control unit or wall support, providing strain relief and preventing the cable from pulling on
the electrical connector during everyday use.

Main features of the Zodiac 220 V cable fixing clip

• Original Zodiac fixing clip for the 220 V power supply cable.
• Guides and secures the mains cable along the control box or wall bracket.
• Provides strain relief to protect the power inlet and internal wiring.
• Compact plastic part designed for humid pool technical rooms.

Compatibility and applications

The R0742900 fixing clip is used on several Zodiac salt chlorinators and mineral salt systems.
It appears in the official spare parts catalogues as “grapa de fijación cable de alimentación 220V” with reference R0742900. [oai_citation:0‡tienda-piscinas.net](https://www.tienda-piscinas.net/grapa-de-fijacion-cable-alimentacion-220v-zodiac-tri-tri-expert-hydroxinator-1441.html?utm_source=chatgpt.com)

• Zodiac Tri salt chlorinators.
• Zodiac Tri Expert and Tri Expert LS models.
• Zodiac Hydroxinator and Hydroxinator iQ for MagnaPool systems. [oai_citation:1‡spareparts.ctxprofessional.com](https://spareparts.ctxprofessional.com/es/despiece.php?ownercode=WW000009&utm_source=chatgpt.com)

Always check the exploded view or parts list of your control unit. If R0742900 is listed as the 220 V power cable fixing clip, this is the correct replacement.

When to replace the Zodiac R0742900 fixing clip

Although small, this clip plays an important role in protecting the 220 V supply lead.
Heat, humidity and accidental knocks in the technical room can damage the plastic over time.

• The clip is cracked, broken or no longer grips the cable securely.
• The power cable hangs freely or rubs against sharp edges or covers.
• Temporary ties have been added because the original clip is missing.
• The unit has been moved and the old clip was damaged during relocation.

Installation guidelines

Installing the Zodiac 220 V power cable fixing clip R0742900 is a simple mechanical task that can often be done together with other service work.

• Disconnect the chlorinator from the mains supply before touching the cable or control box.
• Locate the original mounting point for the clip on the housing or wall bracket using the parts diagram as a guide.
• Remove any remains of the old clip and clean the surface so the new clip seats correctly.
• Engage the new R0742900 clip in its fixing point following the original orientation.
• Place the 220 V power cable into the clip so it is held firmly without crushing the insulation.
• Check that the cable follows a smooth path from the power inlet without sharp bends or tension.

Once installed, the clip keeps the mains cable neatly routed and reduces mechanical stress on the power inlet and internal wiring of the chlorinator.

Care and good practice

Even though the fixing clip itself requires little maintenance, regular inspection of the technical area helps to keep the electrical installation safe.

• Inspect the clip and cable at the start of each season for signs of wear or damage.
• Avoid using the power cable or the clip to support other hoses, tools or cables.
• Ensure that doors, covers and other equipment do not pinch the 220 V cable near the clip.
• Replace the clip immediately if it no longer holds the cable securely in the designed position.

With a correctly fitted Zodiac 220 V power supply cable fixing clip R0742900, the mains cable remains properly supported and the connection to the chlorinator
stays protected during daily operation.