Description
Weltico skimmer barrier anthracite 62341A
The Weltico skimmer barrier anthracite 62341A is a replacement weir flap for Weltico surface skimmers in dark grey finish. Mounted at the skimmer mouth, it moves with the water level to optimise surface skimming, limit the return of floating debris to the pool and help protect the filtration circuit from drawing in air.
Function of the skimmer barrier
The skimmer barrier, also called the weir flap, is a key hydraulic component of the skimmer opening. When the pump is running, the flap tilts towards the pool and creates a thin sheet of water entering the skimmer, concentrating floating dirt, insects, leaves and surface oils. When the pump stops, the flap returns to a more vertical position, reducing backflow and keeping most debris trapped in the skimmer basket area.
If the original flap becomes warped, cracked or stiff, skimming performance decreases and more debris may wash back into the pool. Replacing it with the Weltico skimmer barrier anthracite 62341A restores correct movement and geometry at the skimmer mouth, improving waterline cleanliness and surface flow.
Design and compatibility
The Weltico skimmer barrier anthracite 62341A is moulded from UV resistant plastic in a dark grey colour to match anthracite Weltico skimmer fronts and modern pool finishes. The width, thickness and hinge geometry are designed to fit the original Weltico skimmer body and barrier stops using the specified reference.
- Replacement skimmer barrier in anthracite finish for compatible Weltico skimmers.
- Hinged design that cooperates with the original barrier stops and hinge pins or screws.
- Dark grey colour that blends with anthracite skimmer faces, coping and liners.
The barrier should always be selected according to the skimmer reference and exploded view. Using the dedicated 62341A model ensures that the flap moves freely and seals correctly on compatible Weltico skimmer bodies.
Installation and adjustment
Installation of the Weltico skimmer barrier anthracite 62341A is usually carried out from the pool side with the filtration system stopped. In many pools the water level can remain at the normal operating height, as long as there is clear access to the skimmer mouth and hinge area.
- Stop the filtration pump and secure the electrical controls.
- Remove the existing barrier by releasing the hinge screws or clips.
- Inspect and clean the hinge supports and barrier stops to remove dirt or scale.
- Position the new skimmer barrier 62341A in the hinge location and refit the screws or pins.
- Move the flap by hand to check smooth travel between open and closed positions.
After installation, restart filtration and observe the flap with the pump on and off. It should open easily under flow and return to a near vertical position when the pump stops, without sticking on the skimmer mouth or coping edge.
Operational benefits
A correctly functioning skimmer barrier contributes directly to day to day water quality and to the overall hydraulic stability of the system. Upgrading to a new Weltico skimmer barrier anthracite 62341A ensures that surface water is drawn efficiently into the skimmer while debris is retained inside the basket.
- Improved capture of floating debris along the waterline.
- Reduced backflow of leaves and dirt into the pool when the pump stops.
- More stable skimming, helping to limit air entry into the suction line.
These benefits are especially noticeable in outdoor pools close to vegetation, terraces or driveways where wind can regularly carry fine debris onto the water surface.
Maintenance and replacement intervals
Even with UV stabilised plastics, the skimmer barrier is constantly exposed to sunlight, chlorinated water and mechanical movement. Over time this can cause discolouration, stiff hinging or deformation that affects performance. Regular inspections help determine when replacement with a new 62341A barrier is advisable.
- Check the flap each season for cracks, warping or excessive stiffness.
- Verify that the hinge screws or pins remain secure and corrosion free.
- Clean the top and sides of the barrier with a soft sponge to remove deposits.
If the flap no longer moves freely, stays open or fails to return to its resting position, renewing it with the Weltico skimmer barrier anthracite 62341A is recommended to maintain reliable skimming performance and a clean, controlled waterline.
