Description
Weltico sand skimmer barrier 62341S
The Weltico sand skimmer barrier 62341S is a replacement weir flap in sand colour for compatible Weltico surface skimmers. Mounted at the skimmer mouth, it pivots with the water level to optimise surface skimming, retain floating debris inside the skimmer and help protect the filtration circuit from drawing in air.
Function of the skimmer barrier
The skimmer barrier, also known as the weir flap, is an important hydraulic element of the skimmer opening. When the pump is running, the flap tilts towards the pool and creates a thin sheet of water entering the skimmer, concentrating floating dirt, insects, leaves and surface oils so they are directed into the skimmer basket. When the pump stops, the flap returns to a more vertical position, limiting backflow and keeping most debris inside the skimmer.
If the original flap becomes warped, cracked or stiff, surface skimming becomes less efficient and more debris can wash back into the pool. Replacing it with the Weltico sand skimmer barrier 62341S restores correct movement and geometry at the skimmer mouth, which improves waterline cleanliness and day to day surface cleaning.
Design and compatibility
The Weltico sand skimmer barrier 62341S is moulded from uv resistant plastic in a warm sand tone that complements beige liners, stone effect finishes and sand coloured skimmer fronts. The width, profile and hinge geometry are designed to match compatible Weltico skimmer bodies that use the 62341 reference family.
- Replacement sand coloured skimmer barrier for selected Weltico surface skimmers.
- Hinged flap that works with the original barrier stops and hinge pins or screws.
- Sand finish that blends naturally with light stone and beige waterline designs.
For reliable operation, the barrier should be chosen according to the skimmer model and spare parts diagram. Using the dedicated 62341S reference helps ensure free movement and proper sealing on compatible Weltico skimmers.
Installation and adjustment
Installation of the Weltico sand skimmer barrier 62341S is usually carried out from the pool side with the filtration system stopped. In many pools the water level can remain at its normal operating height as long as there is safe access to the skimmer mouth and hinge area.
- Stop the filtration pump and secure the electrical controls.
- Remove the existing barrier by releasing the hinge screws, clips or pins.
- Inspect and clean the hinge supports and barrier stops to remove dirt and scale.
- Position the new skimmer barrier 62341S in the hinge location and refit the fixings.
- Move the flap by hand to confirm smooth travel between open and closed positions.
After installation, restart the filtration and observe the flap in operation. It should open easily under flow and return to a near vertical rest position when the pump stops, without catching on the skimmer mouth or coping edge.
Operational benefits
A correctly functioning skimmer barrier has a direct impact on daily water quality and hydraulic stability. Renewing the flap with the Weltico sand skimmer barrier 62341S helps ensure that surface water is drawn efficiently into the skimmer and that floating debris is retained in the basket instead of returning to the pool.
- Improved capture of floating debris along the waterline.
- Reduced backflow of leaves and dirt when the circulation pump stops.
- More stable skimming, helping to limit air entering the suction line.
Maintenance and replacement intervals
The skimmer barrier operates in a demanding environment, exposed to sunlight, treated water and constant movement. Over time this can cause discolouration, stiff hinging or deformation that affects performance. Regular inspection allows you to plan preventive replacement with the correct spare part.
- Check the flap each season for cracks, warping or excessive stiffness.
- Verify that hinge screws or pins remain secure and free from corrosion.
- Clean deposits from the top and sides of the barrier with a soft sponge and mild cleaner.
If the flap no longer moves freely, remains open or fails to return to its resting position, replacing it with the Weltico sand skimmer barrier 62341S is recommended to maintain reliable skimming performance and a clean, well controlled pool waterline.
