Description
Weltico A600 sand skimmer renovation kit 64321DS
The Weltico A600 sand skimmer renovation kit 64321DS is a complete front side refurbishment set for A600 design skimmers. It allows you to renew the sealing gaskets and sand coloured front elements while keeping the existing in wall skimmer body, ideal for liner, concrete liner, shell and panel liner pools already equipped with a Weltico A600 skimmer.
Overview and typical use
This renovation kit is intended for pools where the Weltico A600 skimmer body is still structurally sound, but the gaskets, counter flange and front cover have aged, discoloured or no longer seal correctly. By replacing these components, the kit restores watertightness around the skimmer mouth and gives the waterline a warm sand finish that blends well with beige liners and natural style terraces.
All work is carried out from the pool side, so most refurbishment jobs can be completed without opening the pool shell. Within the dedicated spare parts range available via PoolParthub.com, this kit is a practical solution during liner replacement or general renovation of existing residential pools.
Kit contents and compatibility
The Weltico A600 sand skimmer renovation kit 64321DS brings together the key front side elements needed to refurbish the A600 skimmer opening. Each part follows the original A600 design geometry so the new front aligns precisely with the existing throat and screw pattern.
- New sealing gaskets for the skimmer mouth and pool finish interface.
- Counter flange to clamp the liner or wall finish against the skimmer opening.
- Sand coloured front cover elements matched to the A600 design shape.
- Hardware set with screws sized for the Weltico A600 flange layout.
The kit is suitable for Weltico A600 design skimmers installed in concrete, concrete liner, shell and panel liner pools, provided the in wall skimmer body is intact and uses the original A600 fixing pattern.
Benefits of the sand skimmer front
Exposure to sunlight, waterline deposits and pool treatment products gradually affects both the appearance and flexibility of the skimmer front. With the Weltico A600 sand skimmer renovation kit 64321DS you restore a uniform sand coloured finish at the waterline and renew the sealing between the A600 skimmer body and the pool structure.
- Sand coloured front for a soft, natural look along the waterline.
- Visual match for beige liners, stone effect tiles and natural coping.
- Replacement front parts that preserve the original A600 hydraulic opening.
Sealing performance and refurbishment advantages
Over time, sealing gaskets around the skimmer mouth compress and harden, which can lead to seepage or damp marks near the waterline. By replacing the seals and counter flange, the Weltico A600 sand skimmer renovation kit 64321DS restores uniform clamping pressure and helps ensure long term watertightness around the A600 opening.
- New gaskets compensate for ageing and loss of elasticity in the old seals.
- Counter flange distributes tightening forces evenly across the skimmer mouth.
- Assembly tailored to the tolerances of the original Weltico A600 skimmer body.
Because the in wall A600 body remains in place, the kit offers an efficient way to extend the service life of the skimmer installation with minimal structural work on the pool shell.
Installation and practical considerations
Installation of the Weltico A600 sand skimmer renovation kit 64321DS should always be carried out with the filtration system stopped and the water level controlled. In most cases the water surface is lowered just below the skimmer mouth to give comfortable access to the screws and sealing surfaces.
- Remove the existing screws, front cover and old gaskets from the A600 mouth.
- Clean the skimmer throat and contact area to remove scale, dirt and residues.
- Position the new gaskets and counter flange following the A600 assembly layout.
- Fit the new sand coloured front elements, aligning them carefully with the opening.
- Tighten the screws gradually in a cross pattern to compress the seals evenly.
After refilling the pool and restarting filtration, the skimmer area should be monitored to confirm that no moisture appears around the mouth and that surface skimming remains stable and quiet.
Maintenance tips after renovation
Once the Weltico A600 sand skimmer renovation kit 64321DS is installed, simple seasonal checks help preserve both the visual aspect and the sealing performance of the renewed skimmer front.
- Inspect the sand coloured front and screw heads periodically for movement or stress.
- Keep water chemistry balanced to protect plastic components and gaskets.
- Clean the front gently with non abrasive products to avoid scratching the finish.
- Check surface skimming regularly to ensure free flow towards the skimmer mouth.
With correct installation and basic maintenance, this kit offers a durable functional and aesthetic upgrade for existing Weltico A600 design skimmers in natural style residential pools.
