Description
Weltico A600 blue skimmer renovation kit 64321DB
The Weltico A600 blue skimmer renovation kit 64321DB is a complete front side refurbishment set for A600 design skimmers. It allows you to
renew the sealing gaskets and the visible blue front elements while keeping the existing in wall skimmer body, making it ideal for liner,
concrete liner, shell and panel liner pools already equipped with a Weltico A600 skimmer.
Overview and typical use
This renovation kit is intended for pools where the Weltico A600 skimmer body is still structurally sound, but the gaskets, counter
flange and front cover have aged, discoloured or no longer seal correctly. By replacing these components, the kit restores watertightness
around the skimmer mouth and gives the waterline a fresh blue finish without the need for heavy structural work on the pool wall.
All work is carried out from the pool side, so most refurbishment jobs can be completed without opening the pool shell. This makes the
Weltico A600 blue skimmer renovation kit 64321DB a practical choice during liner replacement or when renovating an existing residential
pool.
Kit contents and compatibility
The Weltico A600 blue skimmer renovation kit 64321DB brings together the main front side elements required to refurbish the A600 skimmer
mouth area. Each part follows the original A600 design geometry so the new front aligns precisely with the existing throat and fixing
pattern.
- New sealing gaskets for the skimmer mouth and pool finish interface.
- Counter flange to clamp the liner or wall finish against the skimmer opening.
- Blue front cover elements matched to the A600 design shape and screw layout.
- Hardware set with screws sized for the Weltico A600 flange.
The kit is suitable for Weltico A600 design skimmers installed in concrete, concrete liner, shell and panel liner pools, provided the in
wall skimmer body is intact and uses the original A600 fixing pattern.
Benefits of the blue skimmer front
Exposure to sunlight, waterline deposits and pool treatment products gradually affects both the look and flexibility of the visible
skimmer parts. With the Weltico A600 blue skimmer renovation kit 64321DB you restore a uniform blue finish at the waterline and renew the
sealing between the A600 skimmer body and the pool structure.
- Blue front for a classic pool look that pairs well with many blue liners.
- Refreshed appearance around the skimmer mouth and waterline area.
- Replacement front elements that preserve the original A600 hydraulic opening.
Sealing performance and refurbishment advantages
Over time, the sealing gaskets around the skimmer mouth compress and harden, which can lead to seepage or damp marks near the waterline.
By replacing the seals and counter flange, the Weltico A600 blue skimmer renovation kit 64321DB restores uniform clamping pressure and
supports long term watertightness around the A600 opening.
- New gaskets compensate for ageing and loss of elasticity in the original seals.
- Counter flange distributes tightening forces evenly across the skimmer mouth.
- Assembly is tailored to the tolerances of the original Weltico A600 skimmer body.
Because the in wall A600 body remains in place, the kit offers an efficient way to extend the service life of the skimmer installation
with minimal structural work on the pool shell.
Installation and practical considerations
Installation of the Weltico A600 blue skimmer renovation kit 64321DB should always be carried out with the filtration system stopped and
the water level controlled. In most cases the water surface is lowered just below the skimmer mouth to give comfortable access to the
screws and sealing surfaces.
- Remove the existing screws, front cover and old gaskets from the A600 mouth.
- Clean the skimmer throat and contact area to remove scale, dirt and residues.
- Position the new gaskets and counter flange following the A600 assembly layout.
- Fit the new blue front elements, aligning them carefully with the opening.
- Tighten the screws gradually in a cross pattern to compress the seals evenly.
After refilling the pool and restarting filtration, the skimmer area should be monitored to confirm that no moisture appears around the
mouth and that surface skimming remains stable and quiet.
Maintenance tips after renovation
Once the Weltico A600 blue skimmer renovation kit 64321DB is installed, simple seasonal checks help preserve both the visual aspect and
the sealing performance of the renewed skimmer front.
- Inspect the blue front and screw heads periodically for movement or stress.
- Keep water chemistry balanced to protect gaskets and plastic components.
- Clean the front gently with non abrasive products to avoid scratching the finish.
- Check surface skimming regularly to ensure free flow towards the skimmer mouth.
With correct installation and basic maintenance, this kit offers a durable functional and aesthetic upgrade for existing Weltico A600
design skimmers in classic blue pool designs.
