Description
Weltico A200 design skimmer renovation kit white 60664
The Weltico A200 design skimmer renovation kit white 60664 is a complete front side refurbishment set for A200 design skimmers. It allows
you to renew the sealing parts and visible front elements while keeping the existing in wall skimmer body, ideal for liner, concrete
liner, shell and panel liner pools that are already equipped with a Weltico A200 design skimmer.
Overview and typical use
This renovation kit is intended for pools where the Weltico A200 skimmer body is still structurally sound, but the gaskets, counter
flange and front elements have aged, discoloured or no longer seal correctly. By replacing these components, the kit restores
watertightness around the skimmer mouth and gives the waterline a clean white finish without having to remove the built in skimmer body.
All work is carried out from the pool side, so most refurbishment jobs can be completed without opening the pool wall. This makes the
Weltico A200 design skimmer renovation kit white 60664 a practical choice for renovation projects supported by the spare parts range
offered through PoolParthub.com.
Kit contents and compatibility
The Weltico A200 design skimmer renovation kit white 60664 brings together the key front side parts needed to refurbish the A200 skimmer
mouth area. Each element is dimensioned for the A200 opening and follows the original A200 design geometry for a precise fit on compatible
installations.
- New sealing gaskets for the skimmer mouth and liner or wall interface.
- Counter flange to clamp the liner or finish against the skimmer opening.
- White front elements matched to the A200 design shape.
- Hardware set with screws adapted to the A200 flange layout.
The kit is suitable for A200 design skimmers installed in concrete, concrete liner, shell and panel liner pools, as the parts follow the
original A200 throat dimensions and screw positions defined by Weltico.
Benefits of a renewed white skimmer front
Over time, sunlight, waterline deposits and pool treatment products gradually affect both the appearance and the flexibility of the front
skimmer parts. With the Weltico A200 design skimmer renovation kit white 60664 you restore a uniform white finish at the waterline and
renew the sealing between the A200 skimmer body and the pool structure.
- Neutral white look that matches most liners and coping stones.
- New gaskets to improve watertight contact with the liner or wall finish.
- Refurbishment from inside the pool without changing the built in A200 skimmer body.
Sealing performance and refurbishment advantages
Gaskets around the skimmer mouth compress and harden with age, which can lead to small leaks or damp marks near the waterline. By
replacing the seals and counter flange, the Weltico A200 design skimmer renovation kit white 60664 restores correct clamping pressure and
helps ensure long term watertightness around the A200 opening.
- Fresh seals compensate for loss of elasticity in the original gaskets.
- Counter flange distributes tightening forces evenly around the skimmer mouth.
- Optimised assembly for reliable sealing on compatible Weltico A200 design skimmers.
Because the original A200 body remains in place, the kit offers an efficient way to extend the life of an existing skimmer installation
with minimal structural intervention.
Installation and practical considerations
Installation of the Weltico A200 design skimmer renovation kit white 60664 should always be done with filtration stopped and the water
level controlled. In most cases the water is lowered slightly below the skimmer mouth to give comfortable access to screws and sealing
surfaces.
- Remove the existing screws, front parts and old gaskets from the A200 skimmer mouth.
- Clean the throat and liner or wall contact area to remove scale and debris.
- Position the new gaskets and counter flange following the A200 assembly layout.
- Install the new white front elements, aligning them carefully with the opening.
- Tighten the screws gradually in a cross pattern to compress the seals without distortion.
After refilling the pool to its normal level and restarting filtration, the skimmer zone should be observed to confirm that no moisture
appears around the mouth and that surface skimming remains smooth and regular.
Maintenance tips after renovation
Once the Weltico A200 design skimmer renovation kit white 60664 is installed, simple seasonal checks help preserve both the appearance
and sealing performance of the renewed skimmer front.
- Inspect the white front elements and screw heads periodically for stress or movement.
- Maintain balanced water chemistry to protect gaskets and plastic components.
- Clean the front gently to avoid scratching or dulling the white finish.
- Check surface skimming regularly to confirm that water flows freely towards the skimmer mouth.
With correct installation and basic maintenance, this kit provides a durable visual and functional upgrade for existing Weltico A200
design skimmers in a wide range of residential pool configurations.
