Pressure Pipe PE40 25 mm × 2.7 mm Plain 6 bar Black 100 m - 0700013
Certified online store
Easy returns within 14 days
Looking for advice?
Pressure Pipe PE40 25 mm × 2.7 mm Plain 6 bar Black 100 m
Rated to 6 bar working pressure with a 2.7 mm wall thickness, this 100-metre coil of 25 mm PE40 polyethylene pipe is well suited to pool circulation runs, plant-room interconnections, backwash discharge lines, and garden-adjacent irrigation feeds. Supplied plain-ended, it accepts standard compression fittings used across European pool and water-management installations. The maximum working temperature of 35 °C keeps it comfortably within typical pool-system parameters.
Material & flexibility
PE40 is a low-density polyethylene grade prized for its flexibility, making the 100 m coil straightforward to handle and route around obstacles without specialist bending equipment. The material offers good chemical resistance to chlorinated and salt water, and the UV-stabilised black pigmentation makes it suitable for surface or partially exposed runs where sunlight is a factor.
Plain ends & connection method
Plain (unsleeved) pipe ends give the installer full freedom to cut to any required length and connect using compression fittings, barbed insert fittings with clamps, or electrofusion couplers — the standard approach for PE pipe in European pool plumbing. No gluing or solvent welding is required, keeping installation straightforward for both professional installers and experienced DIY pool owners.
Coil length & on-site economy
A single 100 m coil is enough to plumb the full circulation loop of a typical domestic or semi-commercial pool installation — return lines, suction headers, and bypass runs included — in one purchase, reducing joins and potential leak points. Off-cuts can be used for smaller feed lines, making the coil a cost-effective choice for contractors managing multiple projects.
Additional information
| Brand: | Unbranded |
|---|---|
| Pressure: | 6 bar |
| Connection: | plain |
| Max temperature: | 35 °C |
| Material: | PE40 low-density polyethylene |
| Outer diameter: | 25 mm |
| Wall thickness: | 2.7 mm |
| Max. working pressure: | 6 bar |
| Max. working temperature: | 35 °C |
| Connection type: | Plain (unsleeved) ends |
| Colour: | Black (UV-stabilised) |
| Coil length: | 100 m |
In details
- 100 m coil covers full pool circulation loop in one purchase
- Flexible PE40 material — easy to route without bending tools
- 6 bar pressure rating suits all standard pool plumbing applications
- Plain ends compatible with compression and barbed insert fittings
- Black UV-stabilised finish suitable for exposed or surface runs
- 35 °C max temperature limits use to cold/ambient water circuits only
- Plain ends require separate fittings and clamps — not included
