Description
Meytec buffer solution – pH 7.00 – bottle 60 ml
The Meytec buffer solution pH 7.00 bottle 60 ml is a neutral calibration liquid for pH meters and controllers used in swimming pools, spas and other water treatment systems. It provides a stable pH 7.00 reference value so you can calibrate electronic pH probes and keep everyday measurements accurate and consistent.
Application and purpose
Electronic pH meters gradually drift as probes age and are exposed to chlorinated water, chemicals and temperature changes. Calibrating with Meytec buffer solution pH 7.00 corrects this drift at the neutral point, which is exactly where most pools and spas are operated. Regular use of a reliable pH 7.00 buffer helps ensure that the displayed value reflects the true condition of the pool water.
The pH 7.00 reference is often used as the main calibration point and can be combined with acidic or alkaline buffers, such as pH 4.01 or pH 9–10, when a two or three point calibration is required for higher accuracy.
Compact 60 ml bottle format
The Meytec buffer solution pH 7.00 bottle 60 ml comes in a small screw cap bottle that is ideal for occasional calibration and mobile service work. The compact volume is suitable for users who maintain one or a few instruments and want to keep the buffer fresh over time.
- 60 ml of ready to use neutral pH 7.00 buffer solution.
- Compact bottle that fits easily in test kits and service cases.
- Suitable for handheld meters, pocket testers and small controllers.
To maintain the specified pH value, only the required amount should be poured into a clean container for each calibration and the main bottle must be closed immediately after use.
Calibration with Meytec pH 7.00 buffer
The Meytec buffer solution pH 7.00 bottle 60 ml is compatible with most pH meters that accept external buffer solutions. It is intended for calibration and verification of pH probes in residential and small commercial pools, spas and other installations where reliable pH control is essential for comfort and equipment protection.
- Neutral reference point close to the recommended pool pH range.
- Supports precise adjustment of pH probes in treated water.
- Can be used alone or combined with acidic and alkaline buffers.
Calibration should always follow the procedure described in the instrument manual, including buffer order, stabilisation time and any temperature compensation settings.
Example single point calibration
A simple single point calibration using Meytec pH 7.00 buffer can be carried out quickly and is often sufficient for basic pool checks. It sets the meter correctly at the neutral point where most measurements are made.
- Rinse the pH probe with clean water and gently dry with a soft cloth.
- Pour a small amount of pH 7.00 buffer into a clean container.
- Immerse the probe and wait until the reading is stable.
- Adjust the meter reading to 7.00 according to the calibration menu.
For higher precision, the pH 7.00 buffer can be combined with pH 4.01 and, if needed, an alkaline buffer so the instrument can correct both offset and slope across a wider pH range.
Storage and handling recommendations
To keep the Meytec buffer solution pH 7.00 bottle 60 ml within specification, it should be stored in a cool, dry place away from direct sunlight and heat sources. Good handling practices help to avoid contamination and extend the useful life of the buffer solution.
- Always close the bottle tightly immediately after dispensing.
- Use only clean containers for the working volume and discard leftovers.
- Never pour used buffer back into the original bottle.
With correct storage and regular calibration, this compact pH 7.00 buffer solution helps maintain accurate pH readings, supports stable dosing control and contributes to comfortable, well balanced pool and spa water.
