Fluidra - Pre-filter Lid O-Ring for Perfom Plus ECO VS Pump (1.10 kW)

Fluidra – Pre-filter Lid O-Ring for Perfom Plus ECO VS Pump (1.10 kW)

This is the genuine Fluidra replacement O-ring that seals the pre-filter basket lid on the Perfom Plus ECO VS variable-speed pool pump (single-phase, 1.10 kW). It creates a water-tight seal between the lid and the pump body, preventing air ingress and water leaks that would impair pump performance. Replacing a worn or damaged O-ring is one of the most effective first steps when a pump shows signs of air leaks, loss of prime, or dripping around the strainer cover.

Compatibility

This O-ring is designed specifically for the Fluidra Perfom Plus ECO VS pump in the 1.10 kW, single-phase configuration. Always verify your pump’s model designation and power rating before ordering, as Fluidra produces several ECO VS variants and lid O-rings are model-specific in their dimensions. If you are unsure, cross-reference with your pump’s exploded-view parts diagram or contact your Fluidra distributor.

Why Genuine Matters

A genuine Fluidra O-ring is manufactured to the exact diameter, cross-section, and elastomer specification required for a reliable, long-lasting seal in pool-water conditions. Aftermarket substitutes may differ subtly in size or compound hardness, leading to premature failure, persistent leaks, or lid damage. Fitting the correct OEM part ensures the seal performs as designed throughout the pump’s service life.

Installation

Switch off and isolate the pump from the power supply before opening the pre-filter housing. Remove the strainer lid, extract the old O-ring, and clean the groove thoroughly. Lightly lubricate the new O-ring with a silicone-based grease (do not use petroleum-based products), seat it evenly in the groove without twisting, and refit the lid. Check for leaks on first restart. No special tools are required, but if you are unfamiliar with pool pump maintenance, a qualified technician is recommended.