Fluidra - Power Electronics Board for Elite Connect CellGuard pH 12 g/h

Fluidra – Power Electronics Board for Elite Connect CellGuard pH 12 g/h

This is the genuine Fluidra replacement power electronics board (PBA) for the Elite Connect CellGuard pH 12 g/h salt chlorinator. It is the core power assembly that regulates the DC output current delivered to the electrolysis cell, enabling the unit to produce up to 12 g/h of free chlorine from dissolved salt. Replacing a faulty board with this OEM part restores full, factory-specified performance to the control unit.

Compatibility

This power board is designed specifically for the Fluidra Elite Connect CellGuard pH 12 g/h salt chlorinator (operating at 230 V AC, 50/60 Hz, with a DC output of 2 × 6 A). It is not interchangeable with the 24 g/h, 32 g/h, or 42 g/h variants of the Elite Connect CellGuard range, as each model uses a differently rated power assembly. Always verify your unit’s model label before ordering.

Why Genuine Matters

The Elite Connect CellGuard relies on precise current control to protect the CellGuard® electrode — a patented self-cleaning cell rated for up to 18,000 hours of service life under normal conditions. A genuine Fluidra power board guarantees the correct output profile, protecting both the cell and the pH regulation circuitry. Third-party alternatives may not meet the exact electrical tolerances required, risking premature electrode wear or control errors.

Installation

Replacement of the power electronics board involves working inside a mains-voltage (230 V AC) enclosure and should only be carried out by a qualified electrician or trained pool technician. Always isolate the unit from the mains supply and discharge any stored energy before opening the control unit. Refer to the official Elite Connect CellGuard instruction manual for board layout, connector positions, and commissioning steps after replacement.