Fluidra - Manifold Lateral Arm 1½" 90 mm (Set of 2)

Fluidra – Manifold Lateral Arm 1½” 90 mm (Set of 2)

This genuine Fluidra manifold lateral arm is an internal collection component for the Europe Filter Ø1600-110MM commercial sand filter. Sold as a set of two, each arm extends 90 mm from the central manifold hub with a 1½” connection, drawing filtered water evenly through the sand bed and routing it to the outlet. Replacing worn or cracked lateral arms promptly restores correct flow distribution and protects filtration efficiency.

Compatibility

These lateral arms are designed for the Fluidra Europe Filter Ø1600-110MM, 1.0 m filter bed, rated to 2.5 kg/cm² (2.5 bar). Always verify the manifold connection size and arm length against your existing assembly before ordering, as Europe Filter models are available in several configurations. If in doubt, cross-reference the SKU with your filter’s parts diagram.

Why Genuine Matters

Genuine Fluidra parts are manufactured to exact dimensional tolerances, ensuring a pressure-tight fit within the manifold assembly. Aftermarket arms may vary in wall thickness or thread pitch, risking uneven flow distribution, sand bypass into the pool, or premature failure under operating pressure. Using authentic Fluidra components also keeps your filter warranty intact.

Installation

Lateral arms are accessed by removing the filter lid and lifting out the manifold assembly. Unscrew the old arms, thread in the replacements hand-tight, and confirm all connections are secure before reloading sand media and resealing the tank. Due to the size of the Europe Filter Ø1600 and the need to handle filter media, professional installation is strongly recommended.