Fluidra - Lateral Collector Assembly Ø75 mm for Volcano Sand Filter Ø1400 mm

Fluidra – Lateral Collector Assembly Ø75 mm for Volcano Sand Filter Ø1400 mm

This is the genuine Fluidra lateral collector assembly designed for the Volcano commercial sand filter with a tank diameter of 1400 mm. Fitted at the base of the filter vessel, it comprises a central hub and a set of slotted lateral arms that collect filtered water during normal filtration and distribute backwash water evenly through the sand bed during regeneration cycles.

Compatibility

This collector assembly is a direct OEM replacement for the Fluidra Volcano sand filter range (tank diameters Ø1050 to Ø2000 mm), specifically sized for the Ø1400 mm tank variant with a Ø75 mm central collector pipe. Always verify your filter model and tank diameter before ordering, as collector assemblies are tank-size specific.

Why Genuine Matters

An incorrectly sized or poor-quality collector assembly can result in sand passing into the pool, uneven backwash distribution, and accelerated wear on the filter medium. Using a genuine Fluidra part guarantees precise dimensional fit, correct slot sizing to retain filter media, and the material durability required for continuous commercial operation.

Installation

Replacement requires draining and opening the filter vessel. The collector assembly is located at the bottom of the tank and connects to the central standpipe. Professional installation by a qualified pool technician is strongly recommended to ensure a leak-free, correctly aligned fit and to avoid damage to the tank or valve connections.