Fluidra - Filter Tank Lid with Gasket for Europa Pro T/G/M

Fluidra – Filter Tank Lid with Gasket for Europa Pro T/G/M

This is the genuine Fluidra replacement filter lid and gasket assembly for the AstralPool Europa Pro T/G/M sand filter range. It seals the top of the filter tank, maintaining system pressure and preventing leaks during normal filtration cycles. Supplied as a complete kit — lid and gasket together — so you have everything needed for a proper, leak-free repair in one order.

Compatibility

This lid and gasket assembly fits the Fluidra AstralPool Europa Pro T/G/M sand filter series, including models 64990 and 64998 (Ø500 mm tank, 1½” outlets), model 64991 (Ø600 mm tank, 2″ outlets), and model 64992 (Ø750 mm tank, 2″ outlets). It covers both the standard and Long variants of the Europa Pro T/G/M lineup. If you are unsure of your exact model number, check the label on your filter tank before ordering.

Why Genuine Matters

The Europa Pro filter tank operates at up to 2.5 bar working pressure inside a glass fibre reinforced polyester vessel. A correctly dimensioned, OEM-spec gasket is essential to maintain a reliable pressure seal — aftermarket parts may not match the seating geometry precisely, risking slow weeps or sudden failure. This genuine Fluidra part is manufactured to the same tolerances as the original, ensuring a confident, lasting fit every time.

Installation

Before starting, relieve all system pressure and isolate the pump. Remove the retaining ring, lift out the old lid, and peel away the worn gasket. Clean the seating groove thoroughly, seat the new gasket without lubricant (unless otherwise specified in your filter manual), and refit the lid and retaining ring. Restore pressure gradually and check for leaks. Professional installation is recommended if you are unfamiliar with pressurised filter systems.