Fluidra - Diffuser Assembly Ø2350 / 160 mm for Europe Filter 1.2 m Bed

Fluidra – Diffuser Assembly Ø2350 / 160 mm for Europe Filter 1.2 m Bed

This is the genuine Fluidra diffuser assembly designed for the Europe Filter with a Ø2,350 mm tank diameter, 160 mm connection, and a 1.2 m sand bed depth. The diffuser sits at the top of the filter vessel and evenly distributes incoming water across the entire sand bed surface, maximising filtration efficiency and preventing channelling or sand disturbance during backwash cycles.

Compatibility

This diffuser assembly is a direct OEM replacement for the Fluidra Europe Filter Ø2350-160MM 1.2M 2.5 kg/cm² — a heavy-duty commercial sand filter rated for flow rates of 108–152 m³/h and a maximum working pressure of 2.5 bar. Always verify your filter’s tank diameter, bed depth, and connection size before ordering to ensure a precise fit.

Why Genuine Matters

As a genuine Fluidra spare part, this diffuser assembly is manufactured to the exact tolerances of the original equipment, ensuring a leak-free seal, correct water distribution, and long service life. Aftermarket alternatives may not match the precise geometry of the Ø2350 vessel, risking uneven filtration performance or premature wear.

Installation

The diffuser assembly mounts internally at the inlet of the filter tank and typically requires draining the vessel and removing the top access port for installation. Due to the large commercial scale of the Ø2350 Europe Filter, installation by a qualified pool technician or engineer is strongly recommended to ensure correct seating and safe recommissioning at operating pressure.