Fluidra - Collector Assembly Ø90 mm for Europe Filter Ø1400 1½"

Fluidra – Collector Assembly Ø90 mm for Europe Filter Ø1400 1½”

This is the genuine Fluidra collector assembly for the Europe Filter Ø1400 commercial sand filter with 90 mm connections and a 1½” outlet. The collector assembly sits inside the filter tank and is responsible for evenly distributing water across the sand bed during filtration and collecting filtered water efficiently at the base. It is an essential internal component for correct filter performance and must be replaced with a genuine part to maintain rated flow and pressure integrity.

Compatibility

This collector assembly is designed specifically for the Fluidra Europe Filter Ø1400 with 90 mm connections, 1.0 m filter bed depth, and a working pressure rating of 2.5 kg/cm² (2.5 bar). The Europe Filter range comprises large-format commercial laminated polyester and fibreglass sand filters widely used in public pools, leisure centres, and large private installations across Europe. Always verify your filter’s diameter, bed depth, and outlet size before ordering.

Why Genuine Matters

Using a genuine Fluidra replacement collector assembly ensures the component is manufactured to the precise dimensional tolerances of the original, maintaining even water distribution across the full filter cross-section and preventing sand bypass or channelling. Aftermarket alternatives may not seal or seat correctly within the tank, leading to reduced filtration efficiency or premature failure. A genuine part also keeps your system compliant with its original pressure rating of 2.5 bar.

Installation

Replacement of the collector assembly requires draining the filter tank and removing the sand media to access the internal components. The assembly must be carefully seated and secured according to Fluidra’s service documentation before the tank is refilled with filter sand. Professional installation by a qualified pool technician is strongly recommended for this type of internal filter work.