Fluidra - Collector Assembly Ø140 mm for Europe Filter Ø2000 – 1½"

Fluidra – Collector Assembly Ø140 mm for Europe Filter Ø2000 – 1½”

This is the genuine Fluidra collector assembly (Ø140 mm, 1½” connection) designed for the Europe Filter Ø2000 mm commercial sand filter. Fitted at the base of the filter tank, the collector assembly draws filtered water evenly through the sand bed and distributes water uniformly across the bed during backwash cycles. It is a critical internal component for reliable filtration performance in high-volume commercial pool installations.

Compatibility

This collector assembly is a direct OEM replacement for the Fluidra Europe Filter Ø2000–140 mm, 1.0 m sand bed, rated to 2.5 kg/cm². Always verify your filter’s model reference and tank diameter before ordering, as Europe Filter collector assemblies are size-specific and are not interchangeable between different tank diameters.

Why Genuine Matters

As a genuine Fluidra spare part, this assembly is manufactured to the exact tolerances of the original, ensuring a precise fit within the filter tank and maintaining the rated operating pressure of 2.5 kg/cm². Using a non-OEM part risks poor fit, sand bypass, and potential filter damage — all avoided with a genuine replacement. Fluidra’s broad European spare parts network means long-term availability for commercial installations.

Installation

The collector assembly is accessed via the filter’s sand discharge or inspection port and seated centrally at the base of the tank. Professional installation by a qualified pool technician is strongly recommended, as the filter must be fully depressurised, drained, and the sand media removed before the assembly can be inspected or replaced. Correct seating is essential to prevent sand passing into the return lines.