Fluidra - Collector Assembly Ø140 for Europe Filter Ø2500

Fluidra – Collector Assembly Ø140 for Europe Filter Ø2500

This is the genuine Fluidra replacement collector assembly for the Europe Filter Ø2500 commercial sand filter, designed for the 140 mm connection variant rated to 2.5 kg/cm² (2.5 bar). The collector sits at the base of the filter tank and comprises a central hub with slotted lateral arms that collect filtered water during normal operation and distribute flow evenly across the entire sand bed during backwash cycles.

Compatibility

This collector assembly is specifically designed for the Fluidra Europe Filter Ø2500 – 140 mm, 1.0 m bed, 2.5 kg/cm² (2.5 bar) model — a large-volume commercial polyester and fibreglass sand filter with a 4.9 m² filter area and flow rates of 122–172 m³/h. Always verify your filter’s tank diameter, bed depth, and connection size before ordering, as Fluidra produces collector assemblies in multiple sizes for different Europe Filter models.

Why Genuine Matters

Using a genuine Fluidra OEM collector assembly ensures a precise fit within the filter tank and correct slot geometry across all lateral arms, which is critical for even water distribution and effective backwashing at high commercial flow rates. Non-genuine substitutes may not match the exact hub dimensions or lateral spacing, potentially leading to channelling in the sand bed, sand bypass, or premature failure under operating pressure.

Installation

Installation requires draining the filter tank and removing all filter sand to access the collector at the base. The assembly should be inspected for cracked or clogged laterals during routine annual maintenance. After fitting the replacement collector, refill with fresh filter-grade sand and run a full backwash cycle before returning the filter to service. Due to the scale of a Ø2500 commercial filter, installation by a qualified pool technician is strongly recommended.