Fluidra - Collector Assembly for Ø900 Sand Filter 2½"

Fluidra – Collector Assembly for Ø900 Sand Filter 2½”

This is the genuine Fluidra collector assembly designed for the Ø900 mm sand filter with a 2½” connection and a flow capacity of 30,000 l/h. The assembly consists of a central hub and slotted lateral arms that sit at the base of the filter tank, collecting filtered water during normal filtration and evenly distributing flow during backwash cycles. Replacing a worn or broken collector assembly restores full filtration efficiency and prevents unfiltered water from bypassing the sand bed.

Compatibility

This collector assembly is specifically matched to the Fluidra Ø900 mm sand filter rated at 30,000 l/h with a 2½” pipe connection (valve not included). Always verify your filter’s tank diameter and connection size before ordering, as collector assemblies are not interchangeable across different tank diameters. Consult your filter’s exploded-view parts diagram or a qualified technician if in doubt.

Why Genuine Matters

Genuine Fluidra parts are manufactured to precise tolerances to ensure a secure, leak-free fit inside the filter tank. A correctly seated collector assembly is critical to maintaining even water distribution across the sand bed, preventing channelling, and achieving effective backwashing. Aftermarket alternatives may not match the hub diameter or lateral slot dimensions, leading to reduced filtration performance or premature failure.

Installation

The collector assembly is installed at the bottom of the filter tank and connects to the central standpipe. Drain and open the filter tank before removal, following all safety procedures. Professional installation is recommended, particularly for commercial or high-flow installations at this tank size.