Fluidra - CellGuard Electrolysis Cell Inlet Check Valves – Elite Connect pH 12

Fluidra – CellGuard Electrolysis Cell Inlet Check Valves – Elite Connect pH 12

These are the genuine Fluidra replacement inlet check valves for the CellGuard electrolysis cell fitted to the Elite Connect CellGuard pH 12 salt chlorinator. Check valves ensure water flows in the correct direction through the electrolysis cell, protecting electrode performance and preventing reverse flow that could damage the system. Replacing worn or damaged inlet valves restores reliable, safe operation of your chlorination cell.

Compatibility

Designed specifically for the AstralPool Elite Connect CellGuard pH 12 salt chlorinator (12 g Cl/h). The CellGuard cell connects to PVC pipework via Ø63/50 mm glued fittings; these inlet check valves are installed on the water inlet side of the cell using PVC solvent cement. Always confirm your chlorinator model before ordering, as different output variants use different cell assemblies.

Why Genuine Matters

Genuine Fluidra check valves are dimensionally matched to the CellGuard cell body, ensuring a secure, leak-free glued joint. The valves incorporate a directional arrow on the outer body so correct flow orientation can be verified at a glance. Non-genuine alternatives may not seat correctly, risking water bypass, cell damage, or loss of the CellGuard self-cleaning function that keeps electrodes running at full efficiency.

Installation

The inlet check valves are glued into the cell pipework using standard PVC solvent adhesive. Excess adhesive must be removed immediately after joining, as it can block the internal retention mechanism and restrict water flow through the cell. Installation should be carried out by a qualified pool technician following the Elite Connect CellGuard instruction manual.