DURATECH - Adagio projector wall niche 25mm liner

DURATECH Adagio projector wall niche 25mm liner

The DURATECH Adagio projector wall niche with 25mm liner is a purpose-built housing solution designed to integrate an underwater projector or light fitting seamlessly into the pool wall of liner-constructed pools. This wall niche provides a recessed, watertight mounting point that allows the light source to sit flush with the pool wall, creating a clean, professional finish while ensuring long-term structural integrity at the point of installation. Designed specifically for use with liner pools featuring a 25mm liner thickness, this niche forms the critical interface between the pool structure and the lighting unit, protecting both the liner and the internal fitting from water ingress, liner pull, and mechanical stress.

As part of the DURATECH Adagio lighting range, this wall niche is engineered to be compatible with Adagio series underwater projectors, ensuring a precise mechanical fit, reliable sealing, and correct alignment of the light beam within the pool. The niche housing is constructed from robust, chemical-resistant materials suited to continuous immersion in chlorinated or saltwater pool environments, maintaining dimensional stability and resistance to UV degradation over time. The 25mm liner specification refers to the niche’s design geometry, which accommodates the liner material being clamped and sealed correctly between the niche body and its front fascia ring, preventing water from tracking behind the liner at this vulnerable penetration point. This clamping system is a critical safety and durability feature in liner pool construction.

Technical characteristics and installation context

The Adagio wall niche is designed for new-build or renovation liner pool projects where an in-wall light projector is to be installed. The niche is typically set into the pool shell or fitted to the pool wall structure prior to liner installation, with the liner subsequently dressed over the niche body and secured by the clamping ring. This sequence ensures a watertight seal that conforms to standard liner pool construction practice. The 25mm liner compatibility ensures the niche geometry correctly accommodates the liner thickness without distortion, overstretching, or seal compromise — all of which are common failure points with incorrectly specified niches.

Installation requires the projector unit to be inserted into the niche from the wet side of the pool, with all electrical connections made from the dry side through the pool wall, in compliance with applicable low-voltage pool lighting standards. The niche is matched in dimension and thread or bayonet interface to accept the DURATECH Adagio projector body, ensuring the optic is correctly positioned relative to the liner face for optimal light distribution. Correct niche selection by liner thickness is essential, as using an incorrect variant will compromise the liner seal and potentially void the installation warranty.

Suitability and buying guidance

This wall niche is specifically intended for liner swimming pools — both residential and light commercial — where the pool wall is formed using a flexible liner material of approximately 25mm thickness. It is not suitable for concrete, fibreglass, or tiled pool surfaces, which require different niche configurations. It is designed to work exclusively with the DURATECH Adagio range of underwater projector lights and should not be used as a universal niche for other brands or models, as dimensional and sealing compatibility cannot be guaranteed outside the Adagio system.

This product is appropriate for pool builders, professional installers, and informed DIY pool owners undertaking a liner pool construction or full liner replacement project where integrated wall lighting is planned. Buyers should verify their liner thickness and confirm projector model compatibility with the Adagio range before purchasing to ensure a correct and safe installation.