Description
Anthracite skimmer lid and frame 8080A
The anthracite skimmer lid and frame 8080A is a replacement cover set for pool skimmers, designed to renew the visible top section around
the skimmer opening in a modern dark grey finish. By replacing a faded or cracked lid and its support frame, this set restores a clean,
contemporary look at deck level and helps protect the skimmer body below from dirt, UV and mechanical impacts.
Overview and typical use
Skimmer lids and frames are exposed every day to sunlight, temperature changes and foot traffic around the pool. Over time this can lead
to discolouration, hairline cracks or deformation that affect both safety and appearance. The anthracite skimmer lid and frame 8080A is
intended as a like for like replacement for installations using the 8080 format, adding an elegant dark grey finish that suits many
modern pool designs.
Only the upper frame and removable cover are replaced, so the skimmer body and hydraulic connections remain untouched. This makes the
8080A set a practical option during deck renovation or when updating the visual style of the pool edge.
Design, material and finish
The anthracite skimmer lid and frame 8080A is typically manufactured from robust UV resistant plastic made for outdoor use. The material
is designed to withstand contact with chemically treated pool water, rain and normal loads from people walking around the pool.
- Anthracite surface that blends with grey coping stones and composite decking.
- Textured top side to provide grip for wet bare feet around the pool edge.
- Supporting frame that transfers loads safely to the surrounding deck structure.
The removable lid gives quick access to the skimmer basket and any dosing devices placed in the skimmer throat, making regular
maintenance tasks faster and cleaner.
Compatibility and sizing
The 8080A reference corresponds to a specific skimmer lid and frame geometry in anthracite finish. For a secure and stable fit, the
replacement set must match both the original skimmer model and the opening left in the deck. Using the correct format avoids rocking,
rattling or gaps between the frame, lid and surrounding paving.
- Designed as a replacement lid and frame for skimmers using the 8080 size.
- Frame is installed in or on the deck to create a stable support for the cover.
- Lid sits flush with the frame for a neat, low profile finish at deck level.
Before ordering, checking the clear opening and outer frame dimensions against the existing cover is recommended to confirm that the
8080A anthracite set is compatible with the installed skimmer.
Installation guidelines
Fitting the anthracite skimmer lid and frame 8080A can usually be carried out during routine pool maintenance with basic hand tools. The
pool water level generally does not need to be altered, as the work is limited to the deck surface around the skimmer.
- Remove the existing lid and, if needed, carefully lift or unscrew the old frame.
- Clean the support surface to remove old mortar, dirt and loose material.
- Position the new frame and check level and alignment with the surrounding coping.
- Fix the frame according to the skimmer manufacturer’s recommendations.
- Place the new anthracite lid in the frame and verify that it sits flat and stable.
Once installed, users should be able to walk over the cover without pronounced movement or noise, and the lid should remain easy to lift
for regular access to the skimmer basket.
Maintenance and service life
After installation, the anthracite skimmer lid and frame 8080A requires only basic care to stay in good condition. Regular visual checks
help to detect early signs of wear, especially in areas with intense sun exposure or heavy use around the pool edge.
- Clean the lid periodically with a soft brush or cloth and mild detergent.
- Avoid abrasive pads or aggressive chemicals that could scratch the plastic.
- Inspect at the start of each season for cracking, warping or excessive fading.
Timely replacement of a damaged skimmer cover improves safety around the pool, protects the skimmer opening from large objects and keeps
the deck line visually consistent with the rest of the pool surround.
