Flotide/MEGA-warmtepomp, type Plug & Play A3/32 – exploded view en reserveonderdelen

Flotide/MEGA / MEGA Heat Pump Plug & Play A3/32 — exploded view & spare parts

Op deze pagina vindt u de officiële explosietekening en de volledige stuklijst voor de Flotide/MEGA / MEGA Heat Pump, type Plug & Play A3/32 (factory reference 7024509). The A3/32 is a compact above-ground pool heat pump designed to connect directly to existing 32 mm hose-tail plumbing at 230 V AC, making it a straightforward seasonal heating solution for smaller pools. The diagram breaks the unit down into every major and minor replaceable component, from the outer covers through to the refrigeration circuit. Work through the numbered call-outs below and you will have your part identified and in your basket within minutes.

Hoe u het genummerde schema kunt gebruiken om uw onderdeel te vinden

Every circled number printed on the diagram corresponds exactly to a row in the parts table beneath it — the position number, description, and SKU are all aligned so that what you see on the drawing is what you order. The best approach is to work by area first: mentally divide the unit into zones (top airflow section, refrigeration circuit, controls, chassis) and locate the numbered call-out within the relevant zone before cross-referencing the table. Once you have the position number, check the description carefully to confirm it matches what you have in front of you — component names on this diagram are specific, so “fan motor assembly” and “condensator” are listed as separate line items and should not be confused with one another. Bear in mind that some fasteners and small fittings can appear in more than one location on the drawing yet share a single position number; always read the description column to confirm scope. If a position number carries a letter suffix (for example 10a / 10b), each lettered variant is a distinct part — typically a different size, rating, or configuration — so selecting the wrong letter can result in an incompatible component. Where a SKU is shown in the table, that part is available to order directly; positions without a SKU are either structural assemblies not currently sold separately or items that must be quoted individually. If you are uncertain after consulting the diagram, our team is happy to help you verify the correct reference before you order.

Main replaceable assemblies on the Flotide/MEGA / MEGA Plug & Play A3/32

The A3/32 is built around a core refrigeration loop that transfers heat from the surrounding air into your pool water. At the top of the unit sits the top cover (pos. 1), which protects the internal components and channels airflow downward through the evaporator (pos. 2) — the large finned coil where ambient heat is absorbed into the refrigerant. Air is drawn across that coil by the fan motor assembly FP-20060EX-S1-B (pos. 3, SKU 7024885), the most commonly replaced moving part on this model and one we hold in stock. The condensator 25 µF round wired type (pos. 4, SKU 7010427) is the start/run capacitor that provides the fan motor with its initial starting torque; a failing capacitor is a frequent cause of fan motors that hum but will not spin. Operator interaction is handled by the LED display and controller (pos. 5, SKU 7024894), which governs set-point temperature and operating mode. The outer grill (pos. 6) guards the fan blade and is typically replaced after impact damage, whilst the back frame (pos. 7) forms the structural spine of the cabinet. At the heart of the refrigeration circuit is the compressor KSM93V11UDZ (pos. 8), which pressurises the refrigerant; compressor replacement requires an F-Gas-certified engineer. The low pressure switch 0.1–0.3 MPa (pos. 9, SKU 7024791) protects the compressor by cutting power if suction pressure falls below a safe threshold — a failing switch can trigger nuisance lockouts and is a straightforward swap for a qualified technician. Pool water is heated as it passes through the titanium heat exchanger (pos. 10), whose corrosion-resistant construction is suited to both chlorine and salt-water pools. The whole assembly is mounted on the chassis (pos. 11), and pool-side temperature measurement is handled by the temperature sensor behind the front panel (pos. 12, factory reference 7011007).

Kiezen tussen varianten en verpakkingsgroottes

On this particular diagram the position numbers do not carry lettered suffixes (such as 10a / 10b), so each position represents a single defined part rather than a family of size options. However, electrical components such as the capacitor at position 4 are rated components where the specification matters: the condensator (SKU 7010427) is specified at 25 µF in the round wired form factor, and fitting a capacitor of a different microfarad rating or connector style — even if it looks similar — can prevent the fan motor from starting correctly or shorten the motor’s service life. Similarly, the low pressure switch at position 9 is calibrated to a specific pressure range (0.1–0.3 MPa) for this refrigeration circuit; a switch rated to a different range will not protect the compressor reliably. Where an item in the table has no SKU listed, please contact us before ordering an alternative, as dimensions, thread pitch, or electrical ratings may differ from visually similar parts sold for other models in the Flotide/MEGA / MEGA range. Always have your factory reference 7024509 to hand when enquiring, so we can confirm the exact revision of the diagram your unit was built to.