Barrière de skimmer Weltico grise - 62341G

Weltico grey skimmer barrier 62341G

The Weltico grey skimmer barrier 62341G is a replacement weir flap in neutral grey for compatible Weltico surface skimmers. Mounted at the skimmer mouth, it pivots with the water level to optimise surface skimming, retain floating debris in the skimmer and help protect the filtration circuit from drawing in air.

Rôle de la barrière de l'écumeur

The skimmer barrier, often called the weir flap, is a key hydraulic element of the skimmer opening. When the pump runs, the flap tilts towards the pool and creates a thin sheet of water entering the skimmer. This concentrates floating dirt, insects, leaves and surface oils so they are directed into the basket. When the pump stops, the flap returns to a more vertical position, limiting backflow and keeping most debris inside the skimmer.

If the original flap becomes warped, cracked or stiff, skimming performance decreases and more debris can wash back into the pool. Replacing it with the Weltico grey skimmer barrier 62341G restores the correct movement and geometry at the skimmer mouth, improving surface cleaning and waterline appearance.

Conception et compatibilité

The Weltico grey skimmer barrier 62341G is moulded from uv resistant plastic in a neutral grey tone that matches many modern skimmer fronts, liners and coping stones. The width, profile and hinge geometry are designed to fit compatible Weltico skimmer bodies that use the 62341 reference family.

• Replacement grey skimmer barrier for selected Weltico surface skimmers.
• Hinged design that works with original barrier stops and hinge pins or screws.
• Grey finish that blends with contemporary pool colours at the waterline.

For reliable operation, the barrier should always be selected according to the skimmer model and spare parts diagram. Using the dedicated 62341G reference helps ensure free movement and proper sealing on compatible Weltico skimmer bodies.

Installation et réglage

Installation of the Weltico grey skimmer barrier 62341G is usually carried out from the pool side with the filtration system switched off. In many pools the water level can remain at its normal height as long as there is clear access to the skimmer mouth and hinge area.

• Stop the filtration pump and secure the electrical controls.
• Remove the existing barrier by releasing the hinge screws, clips or pins.
• Inspect and clean the hinge supports and barrier stops to remove dirt and scale.
• Position the new skimmer barrier 62341G in the hinge location and refit the fixings.
• Move the flap by hand to check smooth travel between open and closed positions.

After installation, restart the filtration and observe the flap in operation. It should open easily under flow and return to a near vertical rest position when the pump stops, without catching on the skimmer mouth or coping edge.

Avantages opérationnels

A correctly functioning skimmer barrier has a direct impact on daily water quality and hydraulic stability. Renewing the flap with the Weltico grey skimmer barrier 62341G ensures that surface water is drawn efficiently into the skimmer and that floating debris stays in the basket zone instead of returning to the pool.

• Improved capture of floating debris along the waterline.
• Reduced backflow of leaves and dirt when the circulation pump stops.
• More stable skimming, helping to limit air entering the suction line.

Fréquence d'entretien et de remplacement

The skimmer barrier operates in a demanding environment, exposed to sunlight, treated water and constant movement. Over time this can cause discolouration, stiff hinging or deformation that affects performance. Regular inspection allows you to plan preventive replacement with the correct spare part.

• Check the flap each season for cracks, warping or excessive stiffness.
• Verify that hinge screws or pins remain secure and free of corrosion.
• Clean deposits from the top and sides with a soft sponge and mild cleaner.

If the flap no longer moves freely, remains open or fails to return to its resting position, replacing it with the Weltico grey skimmer barrier 62341G is recommended to maintain reliable skimming performance and a clean, controlled waterline.