Profec - Coude à 90° en PVC-U, 125 mm, raccord à coller, 16 bars, gris - 0110115

Profec – Elbow 90° PVC-U 125mm Glue Socket 16bar Grey

Designed for large-bore pipework, this 125 mm (ØDi) PVC-U elbow delivers a precise 90° directional change with a centre-to-socket depth (Cb) of 135 mm on both legs, and is pressure-rated to 16 bar — making it well suited to commercial pool plant rooms, high-flow filtration headers, and industrial water systems where robust, permanent pipe joints are required.

Solvent-Cement Connection & Standards Compliance

Both sockets accept standard metric PVC-U pipe via solvent cement (glue socket), forming a fully rigid, leak-free joint. All glue connections conform to EN-ISO 1452-3, the European standard for unplasticised PVC pressure piping systems, ensuring compatibility with other metric PVC-U fittings and pipework across the range.

Material & Chemical Resistance

Moulded from unplasticised PVC (PVC-U) in a neutral grey finish, the elbow offers excellent resistance to chlorinated water, common pool chemicals, and a wide range of industrial fluids. PVC-U does not corrode, scale, or support biological growth, making it a long-service-life choice for buried, encased, or plant-room pipework installations.

Sizing to Your Installation

At 125 mm internal diameter, this elbow is intended for large commercial or semi-commercial pool plant rooms, water treatment systems, or irrigation mains where high volumetric flow rates demand full-bore pipework. It pairs directly with standard DN125 metric PVC-U pipe and the wider Profec 16 bar fitting range — including tees, reducers, and couplings — to allow complete system builds from a single product family.