Maytronics Dolphin C6: cinta de arrastre corta, gris - 14949R0035

Maytronics Dolphin C6 drive track short grey

This is the genuine Maytronics short grey drive track for the Dolphin C6 robotic pool cleaner. The track loops around the guide wheels and drive pulley on one side of the robot, providing the traction needed to propel the cleaner across pool floors, up walls, and along the waterline. Sold as a single short track, it is the correct replacement when only the shorter of the two track sizes requires renewal.

Funcionalidad y diseño

Dolphin C6 series robots use a twin-track drivetrain in which the two sides can differ in length. The short track wraps around the drive pulley and guide wheels on its respective side, with internal teeth that engage the pulley to transmit motor torque directly into forward and reverse movement. Without a correctly tensioned track the robot slips, loses wall-climbing ability, and places unnecessary stress on the drive motor.

Modelos compatibles

This short grey track is the correct OEM replacement for the Maytronics Dolphin C6. The Dolphin C6 belongs to the broader Maytronics 2×2 platform, which also encompasses the Dolphin C6 Plus and closely related 2×2 variants — always verify your robot’s model and serial number before ordering to ensure an exact fit.

Signs that the track needs replacing

Replace the short drive track when you notice the robot spinning in place, failing to climb walls, or drifting to one side during a cleaning cycle. Visible signs include a visibly stretched or slack track (where you can fit more than a finger beneath the belt), cracked or missing teeth on the inner surface, surface crumbling from chemical or UV degradation, or audible slipping under load. Running the robot with a worn track accelerates wear on the drive motor bearings and guide-wheel bushings.

Por qué es importante utilizar recambios originales de Maytronics

Genuine Maytronics tracks are manufactured to exact tooth-pitch and rubber-compound specifications for the Dolphin drivetrain. Aftermarket tracks frequently use softer rubber compounds that stretch faster under pool-chemical exposure or have a tooth profile that does not seat flush against the drive pulley, causing premature slippage. Fitting a genuine part preserves drive efficiency, protects the motor, and keeps your Maytronics warranty intact.

Notas de instalación

Track replacement requires only a flat-head screwdriver. Remove the side plate by locating the two retaining slots on the rear-wheel side and levering them free; withdraw the guide wheels and pulley, slide the worn track off, then loop the new track — teeth inward — back over the pulley and guide wheels before refitting the side plate. A correctly fitted new track will be noticeably tight: if significant slack remains after fitting, recheck wheel and bushing alignment.