Intercambiador de calor de titanio, rosca macho x rosca hembra T 75 - 0891985

Heat exchanger titanium male thread x female thread T 75

With a secondary (pool-side) flow capacity of 350 ltr/min and a primary system pressure rating of 30 bar, this full-titanium spiral heat exchanger is engineered for high-demand commercial and large residential pool heating installations. The 1½” threaded secondary connection and 754 mm overall length make the T 75 a substantial, high-output unit suited to pools heated indirectly via boiler, solar collector, or heat pump circuit. All wetted surfaces are pure titanium — the material of choice wherever salt chlorination or aggressive water chemistry is present.

Corrosion resistance & material choice

Titanium forms a tenacious, self-renewing oxide layer that renders it virtually immune to the chlorides found in salt-chlorinated pools, treated pool water, and geothermal brine circuits. Unlike stainless-steel units, a full-titanium exchanger does not require periodic acid washing to restore performance in saltwater environments, making it the long-term solution for demanding installations where chemistry control cannot always be guaranteed.

Hydraulic ratings & circuit separation

The primary heating circuit (boiler, heat pump, or solar loop) is rated to 30 bar — accommodating high-pressure district-heating or sealed pressurised systems — while the secondary pool circuit operates within the standard 5 bar envelope of most pool filtration pipework. The male-thread inlet on the primary side and female-thread outlet on the secondary side allow straightforward in-line integration downstream of the pool filter, keeping the pool water circuit fully isolated from the heating medium.

Sizing & installation considerations

At 754 mm long and 127 mm in diameter, the T 75 requires adequate plant-room clearance and secure wall or frame mounting to manage thermal expansion and water-hammer loads; professional installation is strongly recommended. The unit can be oriented vertically or horizontally to suit the available plant space, and its 1½” secondary connection aligns with standard European pool pipework for a clean, compact integration.