Brida CN larga Zodiac XA iQ — paquete de 2 - R0902200
Zodiac XA iQ long CN flange — pack of 2
This is the genuine Zodiac replacement long CN flange (flasque CN long) for the XA iQ series robotic pool cleaners, supplied as a matched pair. The flange is a structural end-cap that seats on the wheel-axle assembly, maintaining precise lateral alignment of the drive wheel and protecting the internal bearing from pool water ingress and debris.
Función y papel en el sistema de transmisión
The long CN flange closes the outboard face of the wheel hub, locking the axle in position and providing a bearing surface that absorbs the lateral loads generated during climbing and turning. Without an intact flange the axle can shift under load, causing uneven track tension, wheel wobble, and accelerated bearing wear.
Modelos compatibles
This part fits the full Zodiac XA iQ family, including the 20 XA iQ, 30 XA iQ, 40 XA iQ, XA 2010, XA 2030, XA 2045, XA 2095, XA 3010 iQ, XA 3030 iQ, XA 3095 iQ, XA 4010 iQ, XA 4030 iQ, XA 4045 iQ and XA 4095 iQ. Always verify against your robot’s exploded-view diagram before ordering if you are unsure which flange variant (long or short) applies to your specific wheel position.
Síntomas que indican que es necesario un reemplazo
Replace the long CN flange when you observe lateral play in a drive wheel, a wheel that rocks or wobbles during normal operation, a cracked or deformed hub end-cap visible on inspection, or unusual grinding noise originating from the wheel assembly. Continued use with a damaged flange accelerates bearing failure and can ultimately cause a complete drivetrain seizure.
Por qué es importante utilizar recambios originales
Aftermarket flanges are frequently moulded from lower-grade polymers that creep or crack under the mechanical stress and chemical exposure typical of pool environments. A genuine Zodiac flange is manufactured to the original dimensional tolerances, ensuring correct bearing preload, watertight seating, and full compatibility with Zodiac’s warranty conditions.
Información adicional
| Marca: | Zodiaco |
|---|---|
| Tipo: | Long CN flange (flasque CN long) |
| Cantidad incluida: | 2 (matched pair) |
| Compatible con: | Zodiac XA iQ series — 20, 30, 40 XA iQ; XA 2010/2030/2045/2095; XA 3010/3030/3095 iQ; XA 4010/4030/4045/4095 iQ |
| Puesto: | Outboard wheel-axle end-cap |
| Pieza original del fabricante: | Sí |
| Referencia de pieza Zodiac: | R0902200 |
Este repuesto es adecuado para:
-
Vista explosionada del Zodiac XA 3010 IQ (WR000330)
-
Vista explosionada del Zodiac 30 XA IQ (WR000329)
-
Vista explosionada del Zodiac XA 3030 IQ (WR000328)
-
Vista desmontada del modelo 30 de CARON Zodiac (WR000538)
-
Vista explosionada del Zodiac XA 2045 (WR000378)
-
Vista explosionada del Zodiac XA 2010 (WR000334)
-
Vista explosionada del Zodiac XA 2030 (WR000332)
-
Vista explosionada del Zodiac XA 4010 IQ (WR000326)
-
Vista desmontada del Zodiac 40 XA IQ (WR000325)
-
Vista explosionada del modelo 30 de BLUEDROPS de Zodiac (WR000556)
-
Zodiac XA 4095 IQ - WR000475
-
Zodiac XA 4030 IQ - WR000441
-
Zodiac XA 3095 IQ - WR000473
-
Zodiac XA 2095 - WR000474
-
Zodiac WTR 30 IQ - WR000713
-
Zodiac WRD2 - WR000652
-
Zodiac Hydralians Modelo 12 - WR000549
-
Zodiac CARON Modelo 15 - WR000537
-
Zodiac BLUEDROPS Modelo 20 - WR000555
-
Zodiac BLUEDROPS Modelo 10 - WR000554
-
Zodiac 52 XA-LI IQ - WR000607
-
Zodiac 20 XA - WR000333
-
Zodiac XA 4010 / 4030 / 4045 / 4095 iQ