BWT Aquareva White: toma de retorno + accesorio de pared para piscinas con revestimiento
Envíos 1-2 días
Certificado tienda en línea
Devoluciones fáciles dentro de 14 días
¿Buscas consejo?
Complete BWT Aquareva wall fitting with return inlet for liner pools. One kit with everything needed to install a return: the wall-fitting body (fits walls up to 250 mm thick), the adjustable jet, seal kit, and 18/10 stainless-steel screws.
Made from UV-resistant ABS — colourfast, glossy finish, resistant to pool chemicals. The anti-capillary flange prevents moisture wicking along the pipe. For easier rough-in the fitting ships with self-adhesive protective film over the screw holes.
Back-side connection: 2″ male thread y 50 mm female glue socket (for PVC pipe). The adjustable jet on the pool side lets you dial in the water flow direction precisely.
- For liner pools (BWT TP-270 variant)
- Return inlet and vacuum-port connection in one
- Direct install — no extra seal needed between pipe and jet
- Compatible with 2″ thread and 50 mm glue socket
- UV-resistant ABS, 18/10 stainless-steel screws
- Fabricado en Francia
SKU: 43000007/42000003 · corresponds to BWT parts 43000007 (wall-fitting body) + 42000003 (jet/inlet).
Información adicional
| Marca: | BWT / Aquareva |
|---|---|
| Modelo: | TP-270 kit (liner) |
| Color: | Blanco |
| Material | UV-resistant ABS |
| Pool wall thickness: | Up to 250 mm |
| Rear thread: | 2″ (male) |
| Rear glue socket: | 50 mm (female, for PVC pipe) |
| Jet thread (front): | 1½″ |
| Compatible pool type: | Liner |
| Incluye: | Wall-fitting body, adjustable jet, seal kit, 18/10 stainless-steel screws |
| Fasteners: | 18/10 stainless steel |
| País de origen: | Francia |
En detalle
- Complete kit — wall-fitting body, adjustable jet, gaskets, 18/10 stainless-steel screws
- Anti-capillary flange keeps water from wicking along the pipe
- Adjustable jet direction — dial in the return flow exactly where you want it
- Sized for liner pools (TP-270 variant) — for concrete without liner, pick the concrete version
- Requires a 2″ or 50 mm plumbing branch already run to the pool wall
