BWT Aquareva White Rücklaufanschluss + Wandhalterung für Folienbecken
Versand 1-2 Tage
Zertifiziert Online-Shop
Einfache Rückgaben innerhalb von 14 Tage
Suchen Sie Rat?
Complete BWT Aquareva wall fitting with return inlet for liner pools. One kit with everything needed to install a return: the wall-fitting body (fits walls up to 250 mm thick), the adjustable jet, seal kit, and 18/10 stainless-steel screws.
Made from UV-resistant ABS — colourfast, glossy finish, resistant to pool chemicals. The anti-capillary flange prevents moisture wicking along the pipe. For easier rough-in the fitting ships with self-adhesive protective film over the screw holes.
Back-side connection: 2″ male thread und 50 mm female glue socket (for PVC pipe). The adjustable jet on the pool side lets you dial in the water flow direction precisely.
- For liner pools (BWT TP-270 variant)
- Return inlet and vacuum-port connection in one
- Direct install — no extra seal needed between pipe and jet
- Compatible with 2″ thread and 50 mm glue socket
- UV-resistant ABS, 18/10 stainless-steel screws
- Hergestellt in Frankreich
SKU: 43000007/42000003 · corresponds to BWT parts 43000007 (wall-fitting body) + 42000003 (jet/inlet).
Zusätzliche Informationen
| Marke: | BWT / Aquareva |
|---|---|
| Modell: | TP-270 kit (liner) |
| Farbe | Weiß |
| Material: | UV-resistant ABS |
| Wandstärke des Schwimmbeckens: | Up to 250 mm |
| Rear thread: | 2″ (male) |
| Rear glue socket: | 50 mm (female, for PVC pipe) |
| Jet thread (front): | 1½″ |
| Compatible pool type: | Liner |
| Im Lieferumfang enthalten: | Wall-fitting body, adjustable jet, seal kit, 18/10 stainless-steel screws |
| Fasteners: | 18/10 stainless steel |
| Herkunftsland: | Frankreich |
Im Detail
- Complete kit — wall-fitting body, adjustable jet, gaskets, 18/10 stainless-steel screws
- Anti-capillary flange keeps water from wicking along the pipe
- Adjustable jet direction — dial in the return flow exactly where you want it
- Sized for liner pools (TP-270 variant) — for concrete without liner, pick the concrete version
- Requires a 2″ or 50 mm plumbing branch already run to the pool wall
